Mtd Cub Cadet White 524WE-31AM63TR710 Snow Blower Thrower Parts
Shop Mtd Cub Cadet White 524WE-31AM63TR710 Snow Blower Thrower parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The MTD Cub Cadet White 524WE (model 31AM63TR710) is a gas-powered, two-stage snow blower, likely manufactured in the early to mid-2000s. Featuring a 24-inch clearing width, it struck a balance between power and maneuverability, making it a popular choice for homeowners dealing with moderate snowfall on driveways and walkways. Its two-stage design allowed it to handle heavier, wetter snow conditions more effectively than single-stage models.
About the 524we 31am63tr710
The MTD Cub Cadet White 524WE, model number 31AM63TR710, was a popular snow blower designed for residential use. While the exact years of production may vary, it was likely offered in the early to mid-2000s. It's powered by a gas engine, likely a Tecumseh or Briggs & Stratton engine, with a horsepower rating typically around 5-6 HP. Electric start was a common option on models like this, providing easier starting in cold weather. Being a two-stage snow blower, the 524WE utilizes an auger system to break up and gather the snow, then an impeller throws the snow out of the discharge chute. It features a 24-inch clearing width and an intake height of approximately 20-21 inches, allowing it to handle moderate snowfalls with ease. Throwing distance is typically up to 30-40 feet, depending on snow conditions. This model typically uses a wheel drive system with multiple forward and reverse speeds, allowing for good traction and control. The chute controls are usually manual, allowing the operator to adjust the direction and angle of the snow discharge. While headlight and heated handgrips are not confirmed on this specific model, they are possible upgrades in some configurations. Ideal for homeowners needing to clear driveways, walkways, and patios, the 524WE is well-suited for handling moderate to heavy snowfalls on paved surfaces.
524we 31am63tr710 Specifications
| Engine | Tecumseh or Briggs & Stratton 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 180 lbs |
| Years Produced | Early to Mid 2000s (Estimated) |
524we 31am63tr710 Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn parts to maintain optimal snow throwing performance.
- Shear Pins are Critical: Always use the correct replacement shear pins for your model. Using incorrect pins or bolts can damage the auger gearbox. Keep extra shear pins on hand.
- Fuel Stabilizer is Your Friend: Before storing the snow blower for the off-season, add fuel stabilizer to the gasoline to prevent gumming and corrosion in the fuel system. Drain the fuel tank for long-term storage.
- Oil Changes: Perform regular oil changes according to the engine manufacturer's recommendations. Use the correct oil type and viscosity for cold weather operation.
524we 31am63tr710 History & Background
The MTD Cub Cadet White 524WE was introduced as a mid-sized, two-stage snow blower aimed at homeowners needing more power than a single-stage model could provide. While not a groundbreaking innovation, it offered a solid combination of performance and affordability, contributing to its popularity within the Cub Cadet/White Outdoor lineup. There aren't any known major redesigns during its production run.
Frequently Asked Questions
Which drive belt is compatible with the Mtd Cub Cadet White 524we 31am63tr710?
The 95404260 - Belt, Drive is the compatible drive belt for the Mtd Cub Cadet White 524we 31am63tr710 model.
What replacement drive belt is recommended for the 524we 31am63tr710?
For maintaining optimal performance, the 95404260 - Belt, Drive is the recommended replacement drive belt for the Mtd Cub Cadet White 524we 31am63tr710.
When should I replace the drive belt on my 524we 31am63tr710?
The drive belt, such as the 95404260 - Belt, Drive, should be inspected annually and replaced if showing signs of wear like cracking, fraying, or slipping to ensure efficient power transmission.
What are common parts needed for the 524we 31am63tr710?
A critical wear part for the Mtd Cub Cadet White 524we 31am63tr710 is the drive belt, which is essential for transmitting power to the wheels. The 95404260 - Belt, Drive is a direct replacement for this model.









