Mtd Cub Cadet White 524WE-31AM63SR710 Snow Blower Thrower Parts
The MTD Cub Cadet White 524WE (model 31AM63SR710) is a popular gas-powered, two-stage snow thrower, likely manufactured in the early to mid 2000s. With a 24-inch clearing width, it was designed for homeowners needing a reliable machine to tackle moderate snowfall on driveways and walkways. Its combination of power and maneuverability made it a sought-after model for residential snow removal.
The MTD Cub Cadet White 524WE, model number 31AM63SR710, was part of MTD's effort to provide dependable snow removal equipment under the Cub Cadet and White Outdoor brands. These units were commonly produced in the early to mid 2000s. The engine is typically a Tecumseh or Briggs & Stratton engine, likely ranging from 5 to 6 horsepower. An electric start option was often available on models like this, adding convenience for users. This is a two-stage snow blower, employing an auger to break up the snow and an impeller to throw it. The auger is typically a serrated steel design for effective snow intake. The 524WE boasts a 24-inch clearing width and an intake height around 20-21 inches, allowing it to handle a fair amount of snow. Throwing distance could reach up to 30-35 feet depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds, providing good control. The chute control is generally manual, allowing users to direct the snow stream. Some models may include a headlight for improved visibility. While heated grips were not typically standard on this model, its ease of use and reliable engine made it a popular choice for homeowners dealing with moderate snowfalls on driveways and sidewalks.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-6 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 180 lbs |
| Years Produced | Early to Mid 2000s (Estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged components to maintain optimal performance.
- Shear Pin Replacement: Always keep spare shear pins on hand. If the auger suddenly stops, it likely means a shear pin has broken. Replace it immediately.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel degradation and ensures easy starting next season.
- Oil Changes: Change the engine oil at the recommended intervals (typically annually) to keep the engine running smoothly. Refer to the owner's manual for the correct oil type and capacity.
History & Background
The MTD Cub Cadet White 524WE (31AM63SR710) was introduced as a mid-range snow blower option, offering a balance of power and maneuverability for residential use. While there weren't significant redesigns during its production run, MTD focused on refining the engine and drive system for enhanced reliability. This model played a key role in solidifying Cub Cadet and White Outdoor's presence in the competitive snow blower market.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 524we 31am63sr710?
The Mtd Cub Cadet White 524we 31am63sr710 typically features a Tecumseh or Briggs & Stratton engine, producing around 5-6 horsepower. Some models may have an optional electric start feature for easier starting in cold weather.
What is the clearing width of the 524we 31am63sr710?
The 524we 31am63sr710 has a clearing width of 24 inches, allowing it to efficiently clear a path through moderate snowfalls. The intake height is approximately 21 inches.
Is the 524we 31am63sr710 a single-stage or two-stage snow blower?
The 524we 31am63sr710 is a two-stage snow blower. It uses an auger to break up and gather the snow, then an impeller to powerfully discharge it away from the cleared area. This system is more effective than single-stage models for heavier snow conditions.
What are common parts needed for the 524we 31am63sr710?
Commonly needed parts for the 524we 31am63sr710 include shear pins (for the auger), drive belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regularly replacing these parts ensures optimal performance and prevents breakdowns.
