Mtd Cub Cadet White 31BH55TA756 Snow Blower Thrower Parts
The Mtd Cub Cadet White 31bh55ta756 is a gas-powered, two-stage snow blower popular for its reliability and efficiency in handling moderate to heavy snowfall. With a clearing width around 26 inches, this model, likely manufactured in the early to mid-2000s, provided homeowners and small businesses with a practical solution for clearing driveways and walkways. Its two-stage design allowed it to handle deeper snow than single-stage models, making it a sought-after machine.
The Mtd Cub Cadet White 31bh55ta756 snow blower, part of a series of mid-sized two-stage machines, was designed for residential and light commercial use. While the exact production years may vary, it was likely offered from the early to mid-2000s. This model typically features a Briggs & Stratton or Tecumseh engine, with horsepower ranging from 5 to 8 HP. An electric start option was often available for easier starting in cold weather. The two-stage design utilizes an auger to break up snow and then an impeller to throw the snow further away. The clearing width is typically around 26 inches, and the intake height is approximately 20-21 inches. This allowed it to handle substantial snowfall. Expect a throwing distance up to 30-35 feet, depending on snow conditions. The drive system is wheel-driven, usually offering multiple forward speeds and reverse gears for enhanced maneuverability. Chute control is typically manual, allowing for adjustment of the throwing direction. A headlight is a common feature for improved visibility during early morning or evening snow removal. While heated grips weren't standard on all models, they may have been an aftermarket option. This snow blower excels in moderate to heavy snow conditions and is suitable for paved or unpaved surfaces.
Specifications
| Engine | Briggs & Stratton/Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons (Approximate) |
| Weight | Approximately 200 lbs |
| Years Produced | Early to Mid 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of shear pins on hand and replace them immediately if broken. Using incorrect shear pins can damage the auger gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you're clearing (paved or unpaved) to prevent damage to the blower and the surface.
History & Background
The Mtd Cub Cadet White 31bh55ta756 was a popular model introduced to address the need for a reliable and affordable two-stage snow blower. While specific redesigns are undocumented, Mtd regularly updated components and features across their product lines. This model represents a solid, dependable option that contributed to the popularity of two-stage snow blowers for residential snow removal.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31bh55ta756?
The Mtd Cub Cadet White 31bh55ta756 typically uses a Briggs & Stratton or Tecumseh engine, with horsepower ranging from 5 to 8 HP. An electric start option was often available.
What is the clearing width of the 31bh55ta756?
The clearing width of the Mtd Cub Cadet White 31bh55ta756 is approximately 26 inches, and the intake height is around 21 inches.
Is the 31bh55ta756 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 31bh55ta756 is a two-stage snow blower. It uses an auger to break up the snow and an impeller to throw it out of the chute.
What are common parts needed for the 31bh55ta756?
Common parts needed for the Mtd Cub Cadet White 31bh55ta756 include shear pins, drive belts, auger belts, auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
