Mtd Cub Cadet White 31AH95P6711-PLR-BLST-3310 Snow Blower Thrower Parts
The Mtd Cub Cadet White 31AH95P6711 Plr Blst 3310 is a gas-powered, two-stage snow blower designed for efficient snow removal. With a clearing width of around 33 inches, this model was popular for homeowners and light-duty commercial applications due to its robust performance and ease of use during its production run. Search for the replacement parts you need to keep your 31AH95P6711 Plr Blst 3310 running strong!
The Mtd Cub Cadet White 31AH95P6711 Plr Blst 3310, also known as the PLR Blst 3310, was designed to tackle moderate to heavy snowfall. It's powered by a gasoline engine, most likely a Tecumseh or Briggs & Stratton engine in the 10-11 HP range, depending on the exact year of manufacture. Some models may have featured an electric start option for added convenience. As a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it away from the cleared area. The auger system typically features serrated steel blades for effective snow intake. This model offers a clearing width of approximately 33 inches and an intake height that allows it to handle drifts of up to 20 inches. Its throwing distance is considerable, capable of tossing snow up to 40 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds to provide good maneuverability. The chute is usually controlled manually, with options for adjusting the direction and angle of the snow stream. Many came with a headlight for enhanced visibility during early morning or evening snow removal. The 31AH95P6711 Plr Blst 3310 is well-suited for residential driveways, walkways, and even smaller commercial properties experiencing moderate to heavy snowfall.
Specifications
| Engine | Tecumseh or Briggs & Stratton 10-11 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 33 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Unknown gallons |
| Weight | Approx. 250 lbs |
| Years Produced | Likely Late 1990s- Early 2000s |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for wear, damage, or bending. Replace worn parts promptly to maintain optimal performance.
- Replace shear pins as needed: Shear pins protect the auger and gearbox from damage if a hard object is encountered. Keep spare shear pins on hand and replace them immediately if broken.
- Change the engine oil regularly: Follow the manufacturer's recommendations for oil type and change intervals to ensure long engine life.
- Use fuel stabilizer during off-season storage: Add fuel stabilizer to the fuel tank before storing the snow blower to prevent fuel degradation and carburetor issues.
History & Background
The Mtd Cub Cadet White 31AH95P6711 Plr Blst 3310 was a popular model produced by MTD under the Cub Cadet and White Outdoor brands. This snow blower provided a good balance of power and maneuverability for residential and light commercial use. While exact production dates are difficult to pin down, it was likely manufactured in the late 1990s and early 2000s, solidifying its place as a reliable machine.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31ah95p6711 Plr Blst 3310?
The 31AH95P6711 Plr Blst 3310 typically uses a Tecumseh or Briggs & Stratton gasoline engine in the 10-11 HP range. Some models may have included an electric start option.
What is the clearing width of the 31ah95p6711 Plr Blst 3310?
The 31AH95P6711 Plr Blst 3310 has a clearing width of approximately 33 inches and an intake height of about 20 inches.
Is the 31ah95p6711 Plr Blst 3310 a single-stage or two-stage snow blower?
The 31AH95P6711 Plr Blst 3310 is a two-stage snow blower. It uses an auger to gather and break up the snow, and an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 31ah95p6711 Plr Blst 3310?
Common parts needed for the 31AH95P6711 Plr Blst 3310 include shear pins, belts (auger and drive belts), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
