Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Mtd Cub Cadet White 31AH77SZ710 Snow Blower Thrower Parts

Mtd Cub Cadet White 31AH77SZ710 Snow Blower Thrower parts in stock. Quality OEM and aftermarket replacement parts with fast shipping and competitive prices.

The MTD Cub Cadet White 31AH77SZ710 is a robust snow thrower commonly used from the late 2000s through the early 2010s, primarily gas-powered. Known for its powerful two-stage design and impressive clearing width, it made quick work of residential and light-commercial snow removal. This model was especially popular due to its balance of performance, durability, and ease of use, making it a reliable choice for tackling moderate to heavy snowfall.

About the 31ah77sz710

The MTD Cub Cadet White 31AH77SZ710 snow blower was a popular model in the Cub Cadet/White Outdoor lineup. Production spanned several years, typically from the late 2000s to early 2010s, though exact dates may vary. It's powered by a Briggs & Stratton or similar engine, generally producing around 10-11 HP or approximately 305-342cc. An electric start option was a common feature, providing convenient starting in cold weather. The 31AH77SZ710 is a two-stage snow blower, meaning it uses an auger to break up snow and an impeller to throw it. The auger is typically a serrated steel design for efficient snow intake. The clearing width is commonly 26-28 inches, with an intake height of around 20-21 inches. This allows it to handle significant snow accumulations. Throwing distances can reach up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, with multiple forward and reverse speeds for maneuverability. Chute control is typically manual, allowing the operator to adjust the direction of snow discharge. While not all units had them, some models included a headlight for enhanced visibility during early morning or evening snow removal. Heated grips were not standard. This snow blower is ideal for homeowners and property managers dealing with moderate to heavy snowfall on driveways, sidewalks, and other paved surfaces.

31ah77sz710 Specifications

EngineBriggs & Stratton 10-11 HP Electric Start (Optional)
Stage TypeTwo-Stage
Clearing Width26 inches
Intake Height21 inches
Throwing DistanceUp to 40 ft
Drive SystemWheel - 6 Forward/2 Reverse
Fuel TankApproximately 1.5 gallons
WeightApproximately 200 lbs
Years ProducedLate 2000s - Early 2010s (Approximate)

31ah77sz710 Maintenance Tips

  • Inspect the Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged components promptly to maintain optimal performance.
  • Check and Replace Shear Pins: Shear pins protect the auger gearbox from overload. Inspect them regularly and replace them immediately if broken. Always use the correct shear pin type specified for your model.
  • Use Fuel Stabilizer: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues.
  • Adjust Skid Shoes: Periodically adjust the skid shoes to prevent damage to your driveway or sidewalk surface. Raise the skid shoes for gravel surfaces and lower them for smooth surfaces.

31ah77sz710 History & Background

The MTD Cub Cadet White 31AH77SZ710 was introduced as a mid-range snow blower offering a balance of power and affordability. While there weren't major redesigns during its production run, minor component updates likely occurred. This model played a significant role in providing reliable snow removal for residential users, solidifying Cub Cadet's position in the snow blower market.

Frequently Asked Questions

Which auger drive belt is recommended for the MTD Cub Cadet White 31AH77SZ710?

The recommended auger drive belt for the MTD Cub Cadet White 31AH77SZ710 is 95404195A - Belt, Auger Drive.

When should the auger drive belt on the 31AH77SZ710 be replaced?

The auger drive belt, such as 95404195A - Belt, Auger Drive, should be replaced when it shows signs of wear, cracking, fraying, or if the auger is slipping or not engaging properly.

What are the cross-reference part numbers for the auger drive belt 95404195A?

The auger drive belt, 95404195A - Belt, Auger Drive, is also known by cross-reference numbers such as B1RS57, B195404195, B195404195A, A-95404195, CMXGZAM501080, and SW22835.

What are essential replacement parts for the MTD Cub Cadet White 31AH77SZ710?

An essential replacement part for maintaining the MTD Cub Cadet White 31AH77SZ710 is the auger drive belt. The correct part is the 95404195A - Belt, Auger Drive.

Showing 1-1 of 1 products