Mtd Cub Cadet White 31AH65FH795 Snow Blower Thrower Parts
31AH65FH795 parts and accessories
The MTD Cub Cadet White 31AH65FH795 is a gas-powered two-stage snow thrower, likely manufactured in the early to mid 2000s. With a clearing width around 26 inches, this model gained popularity for its reliable performance in handling moderate to heavy snowfall on residential driveways and walkways. Its two-stage design allowed it to chew through deep snow and throw it a considerable distance.
The MTD Cub Cadet White 31AH65FH795 is a reliable two-stage snow blower designed for residential snow removal. While the exact production years require further verification based on the serial number, it was likely manufactured between the early to mid-2000s. It's typically powered by a Briggs & Stratton or Tecumseh engine ranging from 8 to 10 horsepower. An electric start option was commonly available, providing easier starting in cold weather. The two-stage design features an auger that breaks up the snow and then an impeller that throws it out of the discharge chute. The clearing width is generally around 26 inches with an intake height of approximately 20-21 inches. The throwing distance can reach up to 30-40 feet, depending on snow conditions. Most models feature a wheel drive system with multiple forward and reverse speeds, allowing for controlled movement through varying snow depths. The chute rotation is typically controlled manually via a crank, while the deflector angle is also manually adjustable. A headlight may be included for increased visibility during early morning or evening snow removal. Heated grips are less common on this specific model but might be found on some configurations. This snow blower is ideal for homeowners who need to clear medium to large driveways and walkways of moderate to heavy snow.
Specifications
| Engine | Briggs & Stratton or Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Early to Mid 2000s (Estimated) |
Maintenance Tips
- Inspect the Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger and impeller from damage. Inspect them before each use and replace them immediately if they are broken or sheared. Use only the correct replacement shear pins specified for your model.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easier starting next winter.
History & Background
The MTD Cub Cadet White 31AH65FH795 was part of a line of mid-sized two-stage snow blowers designed for residential use. It offered a balance of power and maneuverability for homeowners needing to clear moderate to heavy snow. While not revolutionary in design, its reliability and ease of use made it a popular choice.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31AH65FH795?
The MTD Cub Cadet White 31AH65FH795 typically uses a Briggs & Stratton or Tecumseh engine ranging from 8 to 10 horsepower. Electric start may be available as an option.
What is the clearing width of the 31AH65FH795?
The clearing width of the MTD Cub Cadet White 31AH65FH795 is approximately 26 inches, with an intake height of about 21 inches.
Is the 31AH65FH795 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 31AH65FH795 is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 31AH65FH795?
Common replacement parts for the MTD Cub Cadet White 31AH65FH795 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
