Mtd Cub Cadet White 31AH65FH700 Snow Blower Thrower Parts
31AH65FH700 parts and accessories
The Mtd Cub Cadet White 31AH65FH700 is a robust snow thrower, likely manufactured in the early 2000s. Powered by a gas engine and featuring a two-stage design, this model offered a substantial clearing width for efficient snow removal. Its popularity stemmed from its blend of power, reliability, and ease of use, making it a favorite among homeowners and property managers dealing with moderate to heavy snowfall.
The Mtd Cub Cadet White 31AH65FH700 series represents a line of snow blowers designed for both residential and light commercial use. While the exact production years might vary, this model likely saw production in the early 2000s. It's equipped with a gas-powered engine, most likely a Briggs & Stratton or Tecumseh engine, producing around 8-11 HP. Some versions may have offered an electric start option for added convenience in cold weather. As a two-stage snow thrower, the 31AH65FH700 utilizes a robust auger system to break up snow and ice, feeding it back to a high-speed impeller. The impeller then forcefully discharges the snow through the chute. This model typically features a clearing width of around 26-28 inches and an intake height of approximately 20-21 inches. Expect a throwing distance of up to 30-40 feet, depending on snow conditions. Drive systems are typically wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. Chute controls are typically manual, allowing the operator to adjust the direction and angle of the snow discharge. Features like a headlight and heated grips (while not guaranteed) would have been common on higher-end models in this class. Ideal for handling moderate to heavy snowfalls on driveways, walkways, and parking areas.
Specifications
| Engine | Likely Briggs & Stratton or Tecumseh 8-11 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Early 2000s (estimated) |
Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Always use the correct shear pins specified for your 31AH65FH700 model. Incorrect shear pins can damage the auger gearbox. Keep extra shear pins on hand.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and carburetor problems.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you're clearing (pavement vs. gravel) to prevent damage to the blower and the surface.
History & Background
The Mtd Cub Cadet White 31AH65FH700 was a popular model in the Cub Cadet/White snow blower lineup, offering a reliable solution for snow removal. While specific details on major redesigns are limited without exact production years, this model likely represented a refinement of existing two-stage snow blower technology, focusing on user-friendliness and performance.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31AH65FH700?
The 31AH65FH700 is likely powered by a Briggs & Stratton or Tecumseh gas engine, producing between 8 and 11 horsepower. Some models may have featured an electric start option for easier starting in cold weather.
What is the clearing width of the 31AH65FH700?
The Mtd Cub Cadet White 31AH65FH700 typically has a clearing width of 26 to 28 inches. The intake height is around 20 to 21 inches, allowing it to handle moderate snow depths.
Is the 31AH65FH700 a single-stage or two-stage snow blower?
The 31AH65FH700 is a two-stage snow blower. It uses an auger to break up and collect the snow, then a separate impeller throws the snow through the discharge chute. This two-stage design allows it to handle heavier snow and throw it further than a single-stage blower.
What are common parts needed for the 31AH65FH700?
Common parts needed for the 31AH65FH700 include shear pins (for the auger), drive belts, auger paddles (if applicable), the scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and prevents breakdowns.
