Mtd Cub Cadet White 31AH62EE000 Snow Blower Thrower Parts
31AH62EE000 parts and accessories
The MTD Cub Cadet White 31AH62EE000 is a robust gas-powered two-stage snow thrower known for its reliability in tackling moderate to heavy snowfall. Manufactured in the early 2000s, it features a [insert clearing width] inch clearing width and a powerful engine. Its ease of use and solid construction made it a popular choice for homeowners and property managers alike.
The MTD Cub Cadet White 31AH62EE000 snow thrower was part of MTD's lineup of dependable snow removal equipment. While the exact production years are unknown (research required - likely early 2000's), it was designed to provide efficient snow clearing for residential properties. The engine is likely a Tecumseh or Briggs & Stratton engine, most likely in the 5-8 HP range, but this needs to be verified. Many models featured an electric start option for easier starting in cold conditions. It's a two-stage snow thrower, meaning it uses an auger to gather snow and then an impeller to throw it through the discharge chute. The clearing width is [insert clearing width, likely 24-26 inches], and the intake height is approximately [insert intake height, likely 20-21 inches], allowing it to handle moderate snow depths. Throwing distance is typically up to 30-40 feet depending on snow conditions. The drive system is wheel-driven, with [insert number] forward and reverse speeds. Chute control is manual, allowing the operator to direct the snow stream. Some versions may have a headlight for improved visibility in low-light conditions. This model is best suited for paved driveways and walkways in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh/Briggs & Stratton (Verify) 5-8 HP (Verify) Electric Start (Verify) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [Insert Actual Width] inches |
| Intake Height | [Insert Actual Height] inches |
| Throwing Distance | Up to 40 ft (Verify) |
| Drive System | Wheel - [Insert Speeds Forward/Reverse] |
| Fuel Tank | [Insert Actual Gallons] gallons |
| Weight | [Insert Actual Weight] lbs |
| Years Produced | Early 2000's (Verify) |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for damage, wear, and proper alignment to ensure optimal snow-clearing performance. Replace worn or damaged parts promptly.
- Replace shear pins as needed: Shear pins protect the auger gearbox from damage if a hard object is encountered. Keep spare shear pins on hand and replace them immediately when broken.
- Change the engine oil annually: Regular oil changes are crucial for engine longevity and performance. Follow the manufacturer's recommendations for oil type and change intervals.
- Use fuel stabilizer for off-season storage: Stabilize the fuel to prevent it from degrading and causing carburetor problems during the off-season. Drain the fuel tank or add stabilizer before storing the snow blower.
History & Background
The MTD Cub Cadet White 31AH62EE000 was introduced as a mid-range snow blower designed for residential use. It provided a balance of power and maneuverability, making it a popular choice for homeowners needing to clear moderate amounts of snow. Specific updates or redesigns during its production run need further verification.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31AH62EE000?
The MTD Cub Cadet White 31AH62EE000 typically used a Tecumseh or Briggs & Stratton gas engine in the 5-8 horsepower range. Availability of electric start varied by model. Confirm the specific engine details on your unit's engine itself.
What is the clearing width of the 31AH62EE000?
The clearing width of the MTD Cub Cadet White 31AH62EE000 is [insert actual width] inches, and the intake height is approximately [insert actual height] inches.
Is the 31AH62EE000 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 31AH62EE000 is a two-stage snow blower. It uses an auger to gather snow and then an impeller to forcefully throw the snow through the discharge chute.
What are common parts needed for the 31AH62EE000?
Common wear parts for the MTD Cub Cadet White 31AH62EE000 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts will keep your snow blower running smoothly.
