Mtd Cub Cadet White 31A-63BD700 Snow Blower Thrower Parts
31A-63BD700 parts and accessories
The MTD Cub Cadet White 31A-63BD700 is a gas-powered, two-stage snow blower, likely manufactured in the late 2000s and early 2010s. Featuring a clearing width around 26 inches, it was popular among homeowners for its combination of power and maneuverability in tackling moderate to heavy snowfall on driveways and sidewalks. Its robust engine and two-stage design allowed it to handle deeper snow than single-stage models.
The MTD Cub Cadet White 31A-63BD700 snow blower was a popular model designed for residential snow removal. While exact production years can vary, it was likely available from the late 2000s into the early 2010s. This model typically features a Briggs & Stratton or Tecumseh engine, with horsepower ranging from 5 to 7 HP. An electric start option was often available, providing easier starting in cold weather. As a two-stage snow blower, the 31A-63BD700 utilizes an auger to break up and collect snow, followed by an impeller to throw the snow through the discharge chute. The clearing width is typically around 26 inches, with an intake height of approximately 20 inches, allowing it to handle significant snowfalls. Throwing distances can reach up to 30-40 feet depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds for controlled movement. Chute controls are usually manual, allowing the operator to adjust the direction and angle of the snow discharge. Some models may include a headlight for improved visibility during early morning or evening snow removal. This snow blower is ideal for homeowners and property managers dealing with moderate to heavy snowfall on driveways, sidewalks, and other paved surfaces.
Specifications
| Engine | Briggs & Stratton or Tecumseh 5-7 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Approximately 1.5 gallons |
| Weight | Approximately 150-200 lbs |
| Years Produced | Late 2000s - Early 2010s (Estimated) |
Maintenance Tips
- Inspect the auger and impeller regularly for wear and damage. Replace worn or damaged parts to maintain optimal performance.
- Always use the correct shear pins. Using incorrect shear pins can damage the auger gearbox. Keep spares on hand.
- Check and adjust belt tension. Proper belt tension ensures efficient power transfer to the auger and impeller. Replace belts if they show signs of wear or cracking.
- Change the engine oil annually. Use the oil type specified in your owner's manual. Consider using fuel stabilizer during off-season storage to prevent fuel breakdown and carburetor issues.
History & Background
The MTD Cub Cadet White 31A-63BD700 was part of a series of snow blowers designed for residential use, offering a balance of power and affordability. It represented a popular choice for homeowners needing a reliable machine for moderate snow removal. There weren't any major redesigns during its production run, but component sourcing may have varied slightly between years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31A-63BD700?
The 31A-63BD700 typically features a Briggs & Stratton or Tecumseh engine, with horsepower ranging from 5 to 7 HP. An electric start was often offered as an option.
What is the clearing width of the 31A-63BD700?
The clearing width of the 31A-63BD700 is approximately 26 inches, and the intake height is around 20 inches.
Is the 31A-63BD700 a single-stage or two-stage snow blower?
The 31A-63BD700 is a two-stage snow blower. It uses an auger to gather snow and then an impeller to throw the snow through the chute.
What are common parts needed for the 31A-63BD700?
Commonly needed parts include shear pins, drive belts, auger belts, the scraper bar, skid shoes, spark plugs, and fuel filters. Routine maintenance items like oil and air filters are also frequently replaced.
