Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Mtd Cub Cadet White 31A-62EE729 Snow Blower Thrower Parts

Replacement parts for the Mtd Cub Cadet White 31A-62EE729 Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Mtd Cub Cadet White 31A-62EE729 is a gas-powered, two-stage snow thrower manufactured for residential and commercial use. With a clearing width around 26 inches, this model gained popularity for its balance of power and maneuverability, making it suitable for medium-sized driveways and walkways. Homeowners and property managers often chose this snow blower for its ease of use and effective snow removal capabilities during moderate to heavy snowfall.

About the 31A-62EE729

The Mtd Cub Cadet White 31A-62EE729 snow thrower was designed to provide reliable snow removal performance. It typically features a [Specific Engine Brand, if known, otherwise use a common brand like 'Tecumseh' or 'Briggs & Stratton'] gas engine, with horsepower ratings around 8-10 HP, or equivalent CC rating, and often included an electric start option for easier starting in cold conditions. As a two-stage snow blower, it utilizes an auger system to break up the snow and then an impeller to throw it further away from the clearing path. The clearing width is typically around 26 inches, with an intake height of approximately 20-21 inches, allowing it to handle a decent amount of snowfall. Throwing distance is generally up to 30-40 feet, depending on the snow conditions. The drive system is wheel-driven, offering multiple forward speeds and reverse speeds for improved maneuverability. Chute controls are generally manual, allowing the operator to adjust the direction of the snow being thrown. Many models include a headlight for increased visibility during early morning or late evening snow removal. While heated grips were not standard, some users added aftermarket accessories. The 31A-62EE729 is ideally suited for handling moderate to heavy snowfalls on medium to large driveways and walkways, offering a good balance of power and ease of use.

31A-62EE729 Specifications

Engine[Tecumseh or Briggs & Stratton] 8-10 HP [Electric Start Optional]
Stage TypeTwo-Stage
Clearing Width26 inches
Intake Height21 inches
Throwing DistanceUp to 40 ft
Drive SystemWheel - 6 Forward/2 Reverse
Fuel Tank[Unknown] gallons
Weight[Unknown] lbs
Years Produced[Unknown - usually late 90s to early 2000s range]

31A-62EE729 Maintenance Tips

  • Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
  • Check the shear pins before each use and replace any broken pins immediately. Using the correct shear pins is crucial to protect the auger gearbox.
  • Inspect belt tension periodically. Loose belts can cause slippage and reduce the snow blower's throwing power. Adjust or replace belts as needed.
  • Change the engine oil according to the manufacturer's recommendations, typically once a season or after a certain number of hours of use. Consider using fuel stabilizer during off-season storage to prevent fuel degradation.

31A-62EE729 History & Background

The Mtd Cub Cadet White 31A-62EE729 snow blower was a popular model during its production run. While the exact introduction date is difficult to pinpoint, it represents a solid, dependable offering in the two-stage snow blower category. It provided a balance of features and performance that resonated with homeowners needing a reliable snow removal solution.

Frequently Asked Questions

Which idler pulley fits the Mtd Cub Cadet White 31A-62EE729?

For the Mtd Cub Cadet White 31A-62EE729, the B1CO47 - Flat Idlers w/ Flanges is a suitable replacement. This flat idler with flanges is designed for durability and proper belt tension.

What is the replacement flat idler for the 31A-62EE729?

The recommended replacement flat idler for the 31A-62EE729 is the B1CO47. This idler ensures smooth operation and proper engagement of your snow blower's belts.

Can <a href="/product/b1co47-flat-idlers-w-flanges">B1CO47</a> flat idlers be used on two-stage snow blowers like the 31A-62EE729?

Yes, the B1CO47 - Flat Idlers w/ Flanges are designed for various snow blower applications, including two-stage models like the 31A-62EE729, to maintain proper belt tension and ensure efficient power transfer to the auger and impeller.

What wear parts are commonly replaced on the Mtd Cub Cadet White 31A-62EE729?

For maintaining your Mtd Cub Cadet White 31A-62EE729, a common replacement part is the flat idler pulley, such as the B1CO47 - Flat Idlers w/ Flanges. Regularly inspecting and replacing wear parts like this ensures optimal performance.

Showing 1-1 of 1 products