Mtd Cub Cadet White 31960S Snow Blower Thrower Parts
The MTD Cub Cadet White 31960s snow blower, likely manufactured in the late 1990s or early 2000s, was a popular gas-powered, two-stage model known for its reliability in handling moderate to heavy snowfalls. Typically featuring a clearing width around 26 inches, this machine offered a balance of power and maneuverability for both residential and light commercial use. Find the parts you need to keep your 31960s running smoothly.
The MTD Cub Cadet White 31960s series snow blower was a common sight in driveways across North America, produced primarily in the late 1990s and early 2000s. These models were typically powered by a Tecumseh or Briggs & Stratton gas engine, ranging from 5 to 8 horsepower (HP), or equivalent in cc, and some offered an electric start option for easier starting in cold weather. As a two-stage snow blower, the 31960s utilizes an auger to break up and gather snow, followed by an impeller that throws the snow through the discharge chute. Typical models boast a clearing width of around 26 inches and an intake height of 20-21 inches, allowing them to tackle substantial snow depths. Throwing distance could reach up to 30-40 feet depending on snow conditions. The drive system is typically wheel-driven, with multiple forward and reverse speeds to adjust to varying snow conditions. The chute rotation is usually manually controlled, allowing users to direct the snow stream. Many models included a headlight for improved visibility during early morning or evening snow removal. While heated grips weren't a standard feature, they could sometimes be found on upper-end models. These snow blowers are well-suited for homeowners and property managers dealing with moderate to heavy snowfalls on driveways, sidewalks, and smaller parking areas.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Gas Engine Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward / 1-2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any damaged parts immediately to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately after striking an object to protect the auger and transmission.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This will prevent fuel from degrading and causing starting problems next winter.
- Skid Shoe Adjustment: Adjust the skid shoes to the correct height for your surface (pavement, gravel, etc.). This will prevent damage to both the machine and the ground.
History & Background
The MTD Cub Cadet White 31960s series snow blowers were part of MTD's broad range of snow removal equipment aimed at the residential and light commercial market. These models were known for their reliable performance and ease of use, solidifying their place as a popular choice during their production run. Although production of this specific model ended, MTD continued innovating with new snow blower designs.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31960s?
The MTD Cub Cadet White 31960s typically used a Tecumseh or Briggs & Stratton gas engine, ranging from 5 to 8 horsepower. Electric start was an available option on some models.
What is the clearing width of the 31960s?
The clearing width of the MTD Cub Cadet White 31960s is typically 26 inches with an intake height of approximately 21 inches.
Is the 31960s a single-stage or two-stage snow blower?
The MTD Cub Cadet White 31960s is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow through the chute.
What are common parts needed for the 31960s?
Common wear parts for the MTD Cub Cadet White 31960s include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Keeping these parts in good condition will ensure optimal performance and longevity of your snow blower.
