Mtd Cub Cadet White 31960-7 Snow Blower Thrower Parts
The Mtd Cub Cadet White 31960-7 snow blower is a robust machine designed for tackling moderate to heavy snowfall. While exact production years may vary, this model, powered by a gas engine, typically offers a clearing width suitable for residential driveways and walkways. Known for its dependable performance and durable construction, the 31960-7 was a popular choice for homeowners seeking a reliable snow removal solution.
The Mtd Cub Cadet White 31960-7 series represents a line of snow blowers built for tackling a variety of snow removal tasks. While specific production years for each variation under the 31960-7 designation can fluctuate, these models were generally produced throughout the late 1990s and early 2000s. Typically equipped with a gas-powered engine, often a Tecumseh or Briggs & Stratton, the engine displacement usually ranges from 5 to 8 horsepower or equivalent CCs, with some versions offering an electric start option for added convenience. The 31960-7 utilizes a two-stage auger system. This system employs a robust auger to break up and collect the snow, then an impeller throws it out of the discharge chute. Clearing widths generally ranged from 24 to 26 inches, with an intake height of around 20 to 21 inches, allowing it to handle moderate to deep snow. Throwing distances could reach up to 30-35 feet, depending on snow conditions and engine power. These models usually feature a wheel drive system with multiple forward and reverse speeds, enhancing maneuverability in snowy conditions. Chute rotation is typically controlled manually via a crank or lever. A headlight may or may not be included depending on sub model. Ideal for homeowners and property managers dealing with moderate to heavy snowfall on paved surfaces, driveways, and walkways.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 4-6 Forward/1-2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 180-220 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage, wear, or bending. Replace worn or damaged parts promptly to maintain optimal snow throwing performance.
- Shear Pin Replacement: Keep a supply of spare shear pins and know how to replace them. They protect the auger gearbox from damage if the auger encounters a solid object.
- Off-Season Storage: Before storing the snow blower for the summer, drain the fuel or add fuel stabilizer to prevent gumming and corrosion in the carburetor. Change the engine oil for best storage practices.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you are clearing. Raise them higher for gravel driveways to avoid picking up stones, and lower them for paved surfaces for a cleaner snow removal.
History & Background
The Mtd Cub Cadet White 31960-7 series was introduced as a mid-range option in their snow blower lineup, offering a balance of power and maneuverability for residential snow removal. These models provided a cost-effective solution for homeowners who needed more power than a single-stage but didn't require the heavy-duty capabilities of larger commercial units. While specific redesigns weren't frequent, minor component updates and engine variations were common throughout its production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 31960-7?
The Mtd Cub Cadet White 31960-7 typically uses a Tecumseh or Briggs & Stratton gas engine, ranging from 5 to 8 horsepower. Some models may offer an electric start option.
What is the clearing width of the 31960-7?
The clearing width of the Mtd Cub Cadet White 31960-7 is generally between 24 and 26 inches, with an intake height of approximately 20-21 inches.
Is the 31960-7 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 31960-7 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 31960-7?
Common parts needed for the 31960-7 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
