Mtd Cub Cadet White 319-960A Snow Blower Thrower Parts
The Mtd Cub Cadet White 319-960a snow blower, a popular choice for homeowners during the late 1990s and early 2000s, is a gas-powered, two-stage snow thrower. Known for its robust performance and reliable snow clearing, this model typically featured a clearing width around 26-28 inches. Its two-stage design allows it to handle heavier snowfalls effectively, making it a favorite for residential snow removal.
The Mtd Cub Cadet White 319-960a snow blower was a mainstay in the Mtd, Cub Cadet, and White Outdoor product lines for several years. Typically manufactured from the late 1990s into the early 2000s, these models were powered by a Tecumseh or Briggs & Stratton gas engine, often ranging from 8 to 10 horsepower. Many models featured an optional electric start for easier cold-weather starting. The 319-960a is a two-stage snow blower, utilizing a robust auger to break up snow and ice and an impeller to throw it away from the clearing path. Commonly, the clearing width was around 26 to 28 inches, with an intake height of approximately 20-21 inches. This allowed it to handle moderate to heavy snowfalls effectively. Throwing distances could reach up to 30-40 feet, depending on snow conditions. The drive system was typically wheel-driven, with multiple forward and reverse speeds, providing good maneuverability. Chute controls were usually manual, allowing the operator to adjust the direction and deflection of the snow stream. Headlights were often included for improved visibility during early morning or late evening snow removal. While heated grips were not a standard feature on most 319-960a models, some variations might have included them. The 319-960a is well-suited for clearing driveways and walkways in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh/Briggs & Stratton 8-10 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5-2 gallons |
| Weight | 200-250 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace worn or damaged parts immediately to maintain optimal performance.
- Check shear pins frequently and replace them if they are broken or sheared off. Use only the correct shear pins specified for your model to protect the auger and gearbox.
- Inspect belts for proper tension and signs of wear or cracking. Replace worn belts to ensure efficient power transfer to the auger and impeller.
- Change the engine oil at the recommended intervals, especially before storing the snow blower for the off-season. Add fuel stabilizer to the gasoline to prevent fuel degradation during storage.
History & Background
The Mtd Cub Cadet White 319-960a series snow blowers were introduced in the late 1990s as a mid-range offering in the Mtd family of snow removal equipment. These models offered a balance of power, clearing capacity, and affordability, making them a popular choice for homeowners dealing with moderate to heavy snowfall. Throughout their production run, minor updates were made, but the core design and functionality remained consistent.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 319-960a?
The 319-960a typically uses a Tecumseh or Briggs & Stratton gas engine, ranging from 8 to 10 horsepower. Some models were available with an optional electric start for easier starting in cold weather.
What is the clearing width of the 319-960a?
The clearing width of the Mtd Cub Cadet White 319-960a snow blower is generally between 26 and 28 inches, with an intake height of approximately 20-21 inches.
Is the 319-960a a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 319-960a is a two-stage snow blower. This means it uses an auger to break up the snow and an impeller to throw the snow away from the clearing path, allowing it to handle heavier and wetter snow conditions more effectively than a single-stage model.
What are common parts needed for the 319-960a?
Common wear parts for the 319-960a include shear pins, belts (auger belt, drive belt), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters. Regular inspection and replacement of these parts will help ensure the snow blower operates efficiently and reliably.
