Mtd Cub Cadet White 319-960 Snow Blower Thrower Parts
The MTD Cub Cadet White 319-960 series snow blowers were popular gas-powered machines, likely manufactured in the late 1990s and early 2000s. These two-stage snow throwers are known for their robust construction and reliable performance, making them a solid choice for homeowners dealing with moderate to heavy snowfall. They typically feature a clearing width around 24-26 inches.
The MTD Cub Cadet White 319-960 snow blower represents a range of models sharing similar designs and components, produced primarily in the late 1990s and early 2000s. While precise engine specs can vary slightly depending on the exact sub-model, they generally feature a Tecumseh or Briggs & Stratton gasoline engine, typically ranging from 5 to 8 horsepower. Many models offered an electric start option for easier cold-weather starts. These machines are primarily two-stage snow blowers. This means they use an auger to break up and gather the snow, and then an impeller to throw it out of the chute. Clearing widths typically range from 24 to 26 inches, with an intake height of around 20-21 inches. This allows them to handle moderate snow depths effectively. Throwing distances can reach up to 30-40 feet, depending on snow conditions and engine power. The drive system is typically a wheel-driven system with multiple forward and reverse speeds, providing decent traction in snowy conditions. Chute controls are usually manual, allowing the operator to adjust the direction and distance of the snow stream. Some models may have a headlight for improved visibility during early morning or late evening snow removal. While heated grips aren't commonly found on these older models, their robust design and reliable engines made them a popular choice for homeowners and even smaller commercial applications where heavy snow removal was frequently required.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward/2 Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts immediately to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them promptly if broken to prevent damage to the auger gearbox. Use only the correct shear pins specified for your model.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easy starting next winter.
- Oil Changes: Change the engine oil at least once a year, or more frequently if used heavily. Use the recommended oil type and viscosity for optimal engine protection.
History & Background
The MTD Cub Cadet White 319-960 series snow blowers were introduced as part of MTD's line of snow removal equipment under various brand names. They were designed to provide a balance of power and maneuverability for residential use. These models represented a reliable and affordable option in the snow blower market, contributing to MTD's reputation for producing durable outdoor power equipment.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 319-960?
The 319-960 series typically uses a Tecumseh or Briggs & Stratton gasoline engine, ranging from approximately 5 to 8 horsepower. Electric start was often available as an option.
What is the clearing width of the 319-960?
The clearing width of the MTD Cub Cadet White 319-960 is typically between 24 and 26 inches, and the intake height is around 20-21 inches.
Is the 319-960 a single-stage or two-stage snow blower?
The 319-960 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 319-960?
Common parts needed for the 319-960 include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
