Mtd Cub Cadet White 319-840 Snow Blower Thrower Parts
The Mtd Cub Cadet White 319-840 snow blower, likely manufactured in the late 1980s and early 1990s, was a popular gas-powered, two-stage snow thrower known for its robust design and reliable performance. With a clearing width typically around 24-26 inches, it offered homeowners an effective solution for tackling moderate to heavy snowfall on driveways and walkways. Its durable construction contributed to its longevity and widespread use.
The Mtd Cub Cadet White 319-840 series snow blowers were a staple in residential snow removal during their production run, offering a blend of power and maneuverability. These machines were generally equipped with a Tecumseh engine ranging from 5 to 8 horsepower, depending on the specific sub-model. Many models featured an electric start option for easier starting in cold weather. As a two-stage snow blower, the 319-840 utilizes an auger system to break up snow and then an impeller to throw the snow through the chute. The clearing width typically ranged from 24 to 26 inches, with an intake height of around 20-21 inches, allowing it to handle substantial snow drifts. The throwing distance could reach up to 30-40 feet, depending on snow conditions. Most models featured a wheel drive system with multiple forward and reverse speeds, providing good traction and control. Chute controls were typically manual, allowing the operator to adjust the direction and deflection of the snow stream. A headlight was often included for improved visibility in low-light conditions. While heated grips were not a standard feature on this older model, the 319-840 was well-suited for handling moderate to heavy snowfall on paved surfaces and was a great choice for homeowners.
Specifications
| Engine | Tecumseh 5-8 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1980s - Early 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins are designed to break under excessive stress, protecting the auger gearbox. Inspect shear pins before each use and replace them immediately if they are broken or damaged. Always use the correct replacement shear pins.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easy starting next winter.
- Skid Shoe Adjustment: Adjust the skid shoes (also known as scraper blades) based on the surface you are clearing to prevent damage to the blower and the surface. Adjust higher for gravel and lower for paved surfaces.
History & Background
The Mtd Cub Cadet White 319-840 series snow blowers were introduced in the late 1980s as a reliable option for homeowners. While specific year-to-year updates are difficult to pinpoint without individual model documentation, the core design remained consistent, focusing on durability and functionality. These machines contributed significantly to the market by providing an accessible and dependable snow removal solution.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 319-840?
The Mtd Cub Cadet White 319-840 typically used a Tecumseh engine ranging from 5 to 8 horsepower. Some models offered an electric start option.
What is the clearing width of the 319-840?
The clearing width of the Mtd Cub Cadet White 319-840 is typically between 24 and 26 inches, with an intake height around 20-21 inches.
Is the 319-840 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 319-840 is a two-stage snow blower. It uses an auger to collect and break up the snow and an impeller to throw it out the chute.
What are common parts needed for the 319-840?
Common parts needed for the Mtd Cub Cadet White 319-840 include shear pins, belts (auger and drive belts), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
