Mtd Cub Cadet White 319-800 Snow Blower Thrower Parts
The Mtd Cub Cadet White 319-800 series snow blowers were popular gas-powered models known for their reliability in tackling moderate to heavy snowfall. Typically manufactured in the late 20th century, these two-stage throwers often featured clearing widths between 24 and 26 inches. Their robust design made them a favorite among homeowners and property managers needing a dependable snow removal solution.
The Mtd Cub Cadet White 319-800 series represents a line of snow blowers designed for residential and light commercial use, primarily manufactured during the 1980s and 1990s. Engine specifications varied, but many models used Tecumseh engines ranging from 5 to 8 horsepower. Some offered electric start options for easier starting in cold weather. As a two-stage snow blower, the 319-800 utilizes a robust auger to break up snow and ice, feeding it into a high-speed impeller that then throws the snow through the discharge chute. Clearing widths typically ranged from 24 to 26 inches, with intake heights around 20-21 inches, capable of handling significant snow depths. Throwing distances could reach up to 30-40 feet depending on snow conditions. Most models featured a wheel drive system with multiple forward and reverse speeds, providing enhanced traction and maneuverability. Chute controls were typically manual, allowing the operator to adjust the direction and distance of the snow stream. A headlight was a common feature for improved visibility during nighttime or early morning snow removal. While heated grips weren't always standard, they could be found on some higher-end variations. The 319-800 series was well-suited for paved driveways, sidewalks, and smaller parking areas, handling everything from light, fluffy snow to heavier, wetter accumulations.
Specifications
| Engine | Tecumseh 5-8 HP, Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5-2 gallons (approximate) |
| Weight | 200-250 lbs (approximate) |
| Years Produced | 1980s-1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts promptly.
- Check and Replace Shear Pins: Shear pins protect the auger from damage if it encounters a hard object. Always have spare shear pins on hand and replace them immediately after they break.
- Adjust Skid Shoes: Adjust the skid shoes to prevent the scraper blade from digging into the ground, especially on uneven surfaces like gravel driveways. Proper adjustment prevents damage to the scraper blade and prolongs its life.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor problems.
History & Background
The Mtd Cub Cadet White 319-800 series snow blowers were introduced to provide a reliable and affordable snow removal solution for homeowners. They were part of a broader line of outdoor power equipment offered by MTD under various brands, including Cub Cadet and White. While there weren't major redesigns, minor improvements and feature variations were introduced throughout the production run, solidifying its position as a dependable option in the snow blower market.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 319-800?
The Mtd Cub Cadet White 319-800 series snow blowers typically used a Tecumseh engine, ranging from 5 to 8 horsepower. Some models offered an electric start option for added convenience.
What is the clearing width of the 319-800?
The clearing width of the Mtd Cub Cadet White 319-800 is typically between 24 and 26 inches, with an intake height of approximately 20-21 inches.
Is the 319-800 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 319-800 is a two-stage snow blower. It uses an auger to collect and break up the snow, then feeds it to a high-speed impeller that throws the snow out of the discharge chute.
What are common parts needed for the 319-800?
Common parts needed for the Mtd Cub Cadet White 319-800 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
