Mtd Cub Cadet White 319-700 Snow Blower Thrower Parts
The Mtd Cub Cadet White 319-700 series snow blowers, likely manufactured in the late 1990s and early 2000s, were popular gas-powered snow throwers designed for residential use. Typically featuring a two-stage design and a clearing width around 24-26 inches, these models provided a good balance of power and maneuverability for homeowners dealing with moderate snowfall.
The Mtd Cub Cadet White 319-700 series represents a line of reliable two-stage snow blowers designed for home use during the late 1990s and early 2000s. While specific engine details can vary based on the exact sub-model, these snow blowers commonly featured a Tecumseh or Briggs & Stratton gasoline engine, likely ranging from 5 to 8 horsepower. Many models included an electric start option for easier starting in cold weather. The 319-700 series are two-stage snow blowers, meaning they use an auger to break up the snow and then an impeller to throw it out the discharge chute. The auger system typically consisted of a serrated steel auger designed to chew through packed snow and ice. Clearing widths generally ranged from 24 to 26 inches, with intake heights around 20-21 inches. This allowed for clearing paths wide enough for sidewalks and driveways. Throwing distance varied, but could typically reach up to 30-35 feet. The drive system was typically wheel-driven, offering multiple forward and reverse speeds for easy maneuverability. Chute controls were generally manual, allowing the operator to adjust the direction and angle of the snow discharge. Many models included a headlight for improved visibility in low-light conditions. Heated grips were less common on these models. The 319-700 series was ideal for homeowners dealing with moderate snowfall on paved surfaces.
Specifications
| Engine | Tecumseh/Briggs & Stratton 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 4-6 Forward/1-2 Reverse |
| Fuel Tank | 1-2 gallons |
| Weight | 150-200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn parts to maintain optimal performance.
- Replace Shear Pins: Keep extra shear pins on hand and replace them immediately if broken. Using the correct shear pins is crucial to protect the auger gearbox.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes to the appropriate height for your surface. This prevents damage to the scraper bar and ensures efficient snow removal.
History & Background
The Mtd Cub Cadet White 319-700 series snow blowers were introduced as a mid-range option for homeowners needing a capable snow removal solution. As a popular model during its production run, this series helped solidify Mtd Cub Cadet White's reputation for providing reliable and affordable snow removal equipment. Specific updates during its run are difficult to pinpoint, but improvements to engine efficiency and minor design tweaks were likely implemented.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 319-700?
The 319-700 series snow blowers typically used a Tecumseh or Briggs & Stratton gasoline engine ranging from 5 to 8 horsepower. Some models offered an electric start option for easier starting.
What is the clearing width of the 319-700?
The clearing width of the Mtd Cub Cadet White 319-700 series is typically between 24 and 26 inches. The intake height is around 20-21 inches.
Is the 319-700 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 319-700 is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller throws the snow out of the chute.
What are common parts needed for the 319-700?
Common parts needed for the 319-700 include shear pins, drive belts, auger belts, auger paddles (depending on model), scraper bar, skid shoes, spark plugs, and fuel filters.
