Mtd Cub Cadet White 318-960A Snow Blower Thrower Parts
The MTD Cub Cadet White 318-960A snow blower, a popular choice during its production run, was known for its reliable gas engine and efficient snow removal capabilities. Typically featuring a clearing width suitable for residential driveways and walkways, this model is often a two-stage unit designed to handle moderate to heavy snowfall. Homeowners and property managers appreciated the 318-960A for its balance of power and ease of use.
The MTD Cub Cadet White 318-960A snow blower was a staple in many households and commercial properties during its production years. While exact years can vary, it's likely the model was produced in the late 1990s and early 2000s. The snowblower typically came equipped with a Tecumseh or Briggs & Stratton gas engine, with horsepower ranging from 8-10 HP, providing ample power for tackling significant snowfall. Electric start was often available as an option, simplifying the starting process in cold weather. As a two-stage snow blower, the 318-960A used an auger to break up snow and then an impeller to throw it. The auger system usually featured durable steel construction for long-lasting performance. The clearing width typically ranged from 26 to 28 inches, with an intake height of around 20-21 inches, enabling it to handle deep drifts. The throwing distance could reach up to 30-40 feet, depending on snow conditions. The drive system was typically wheel-driven, offering multiple forward and reverse speeds for enhanced maneuverability. Chute controls were generally manual, allowing users to adjust the direction and angle of the snow stream. While not all models included them, some 318-960A snow blowers featured a headlight for improved visibility during nighttime or early morning snow removal. This snowblower is well-suited for homeowners and property managers dealing with moderate to heavy snowfall on paved surfaces.
Specifications
| Engine | Tecumseh/Briggs & Stratton 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger and impeller for damage or wear. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger and gearbox from damage. Keep spare shear pins on hand and replace them immediately if broken.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and ensure easy starting next winter.
- Adjust Skid Shoes: Adjust the skid shoes to prevent damage to your driveway or sidewalk. Raise the skid shoes for gravel surfaces and lower them for paved surfaces.
History & Background
The MTD Cub Cadet White 318-960A was a popular model known for its reliability and robust two-stage design. It offered a good balance between power and maneuverability for residential and light commercial use. While not a revolutionary model, it provided consistent performance and helped solidify the brands' reputation for quality snow removal equipment.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 318-960a?
The MTD Cub Cadet White 318-960A typically features a Tecumseh or Briggs & Stratton engine. Horsepower generally ranges from 8 to 10 HP, and electric start was often an available option.
What is the clearing width of the 318-960a?
The clearing width of the MTD Cub Cadet White 318-960A is typically between 26 and 28 inches. The intake height is around 20-21 inches.
Is the 318-960a a single-stage or two-stage snow blower?
The MTD Cub Cadet White 318-960A is a two-stage snow blower. It uses an auger to break up the snow and an impeller to throw the snow away from the clearing area.
What are common parts needed for the 318-960a?
Commonly needed parts for the MTD Cub Cadet White 318-960A include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters.
