Mtd Cub Cadet White 318-960 Snow Blower Thrower Parts
The MTD, Cub Cadet, and White 318-960 snow blowers, manufactured in the late 1990s and early 2000s, were popular gas-powered two-stage models known for their reliable performance in residential snow removal. Typically featuring a clearing width around 26-28 inches, they offered a good balance of power and maneuverability for homeowners dealing with moderate to heavy snowfall. Their two-stage design allowed them to handle deeper snow and throw it a considerable distance.
The MTD, Cub Cadet, and White 318-960 series snow blowers were a staple in the residential snow removal market for several years. Production primarily occurred in the late 1990s and early 2000s. These models were typically equipped with a Tecumseh engine ranging from 8 to 10 horsepower or a similar Briggs & Stratton engine, providing ample power for most snow conditions. An electric start option was available on some models for easier starting in cold weather. As two-stage snow blowers, they utilize an auger to break up the snow and an impeller to throw it out of the chute. The clearing width commonly found on the 318-960 ranged from 26 to 28 inches, with an intake height of around 20-21 inches, allowing them to handle decent snowfalls. Throwing distance could reach up to 30-40 feet depending on snow conditions. These models typically featured a wheel drive system with multiple forward and reverse speeds for enhanced control. Chute rotation was usually manual, offering 180-200 degree rotation. Some models might include a headlight for improved visibility during early morning or late evening snow removal. The 318-960 series was well-suited for homeowners with medium-sized driveways and sidewalks experiencing moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 8-10 HP or Briggs & Stratton 8-10 HP - Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward / 2 Reverse Speeds |
| Fuel Tank | 1.5 Gallons (approximate) |
| Weight | 200-250 Lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
- Oil Change and Fuel Stabilizer: Change the engine oil annually or as recommended by the engine manufacturer. Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season to prevent fuel degradation.
- Skid Shoe Adjustment: Adjust the skid shoes to the proper height for your surface (pavement vs. gravel) to prevent damage to the blower and your driveway.
History & Background
The MTD, Cub Cadet, and White 318-960 snow blowers were introduced as a reliable and affordable option for homeowners needing a two-stage snow removal solution. While there weren't any major redesigns during its production run, small improvements and variations were made across the different branded versions. This model played a significant role in establishing MTD, Cub Cadet, and White as trusted names in the residential snow blower market.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 318-960?
The 318-960 series snow blowers typically used a Tecumseh engine ranging from 8 to 10 horsepower, or a comparable Briggs & Stratton engine of similar power. An electric start option was frequently available.
What is the clearing width of the 318-960?
The clearing width of the Mtd Cub Cadet White 318-960 is typically between 26 and 28 inches, with an intake height of approximately 20-21 inches.
Is the 318-960 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 318-960 is a two-stage snow blower. It uses an auger to collect and break up the snow and an impeller to powerfully discharge it through the chute.
What are common parts needed for the 318-960?
Common parts needed for the 318-960 include shear pins (for the auger), drive belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
