Mtd Cub Cadet White 318-850A Snow Blower Thrower Parts
The MTD, Cub Cadet, and White 318-850a snow blowers, likely manufactured in the 1990s and early 2000s, are gas-powered, two-stage machines known for their reliability. Typically featuring a 26-28 inch clearing width, these models are popular with homeowners for clearing driveways and walkways after moderate to heavy snowfall. Their durable construction and ease of use have made them a long-standing choice for winter snow removal.
The MTD, Cub Cadet, and White 318-850a series of snow blowers represents a solid choice for residential snow removal. These models were generally produced throughout the 1990s and into the early 2000s, offering a reliable and cost-effective solution for homeowners. While exact specifications may vary slightly depending on the specific year and brand iteration, these snow blowers are typically equipped with a Tecumseh or Briggs & Stratton gas engine, generally ranging from 8 to 10 horsepower. Many models offered an electric start option for added convenience. These are two-stage snow blowers, meaning they use an auger to gather snow and then an impeller to throw it. The auger system is designed to break up compacted snow and ice for efficient removal. They generally offer a clearing width of 26 to 28 inches and an intake height of around 20-21 inches. This allows them to handle moderate to heavy snowfalls with ease. Throwing distance is usually up to 30-40 feet, depending on snow conditions. The drive system is typically wheel-driven, with multiple forward and reverse speeds, offering good maneuverability. Chute controls are manual, allowing the operator to direct the snow stream. While some models might have a headlight, heated grips are not typically found on these older machines. Ideal snow conditions for the 318-850a are moderate to heavy snowfalls on paved surfaces.
Specifications
| Engine | Tecumseh or Briggs & Stratton 8-10 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn paddles or broken parts promptly.
- Always use the correct shear pins for the auger. Keep extra shear pins on hand. Replacing broken shear pins prevents serious damage to the snowblower.
- Check the belt tension regularly. Loose belts can cause slippage and reduce performance. Adjust or replace belts as needed.
- Change the engine oil at the recommended intervals, especially before storing the snow blower for the off-season. Use fuel stabilizer in the gasoline to prevent fuel degradation during storage. Adjust skid shoes to prevent scraper blade damage.
History & Background
The MTD, Cub Cadet, and White 318-850a models were introduced as a reliable and affordable two-stage snow blower option for homeowners. While there weren't major redesigns throughout their production run, minor improvements were likely implemented over the years. They are significant for their durability and widespread adoption as a standard snow removal solution for residential properties.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 318-850a?
The 318-850a is typically equipped with a Tecumseh or Briggs & Stratton gas engine, ranging from 8 to 10 horsepower. Some models offered an electric start option.
What is the clearing width of the 318-850a?
The clearing width of the MTD Cub Cadet White 318-850a snow blower is generally between 26 and 28 inches, with an intake height of around 20-21 inches.
Is the 318-850a a single-stage or two-stage snow blower?
The 318-850a is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 318-850a?
Common parts needed for the 318-850a include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance with these parts ensures optimal performance.
