Mtd Cub Cadet White 318-700 Snow Blower Thrower Parts
The MTD Cub Cadet White 318-700 series snow blowers were a popular choice for homeowners and light commercial use, manufactured throughout the late 1980s and 1990s. These gas-powered, two-stage snow throwers provided a reliable solution for clearing driveways and walkways with a clearing width typically ranging from 18 to 21 inches. Their robust design and ease of use made them a dependable option for tackling moderate snowfall.
The MTD Cub Cadet White 318-700 snow blowers represented a solid and practical option for snow removal. Produced over several years, these machines were primarily designed for residential use but were also suitable for light commercial applications. They were typically powered by Tecumseh gasoline engines, with horsepower ratings ranging from 5 to 8 HP, depending on the specific sub-model within the 318-700 series. Some models featured an optional electric start for easier starting in cold weather. The 318-700 series snow blowers are two-stage machines, meaning they use an auger to gather the snow and an impeller to discharge it. The auger system consisted of a serrated steel auger designed to break up compacted snow and ice. Clearing widths varied between models, but commonly ranged from 18 to 21 inches, with an intake height of around 12 to 16 inches. Throwing distances could reach up to 30 feet, depending on snow conditions and engine power. The drive system typically used wheels, with multiple forward and reverse speeds to provide control and maneuverability. Chute rotation was usually manually controlled. While features like headlights and heated grips were not standard, their simplicity contributed to their reliability. These snow blowers are best suited for clearing driveways, sidewalks, and patios with moderate snowfall.
Specifications
| Engine | Tecumseh 5-8 HP, Electric Start (optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 18-21 inches |
| Intake Height | 12-16 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5-2 gallons (approximate) |
| Weight | 150-200 lbs (approximate) |
| Years Produced | Late 1980s - 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts immediately to maintain optimal performance.
- Shear Pin Replacement: Keep extra shear pins on hand and replace them promptly if the auger suddenly stops turning during operation. Use only the correct shear pins specified for your model.
- Fuel System Care: Use fuel stabilizer in the off-season to prevent fuel from degrading and causing carburetor problems. Drain the fuel tank and run the engine until it stalls before long-term storage.
- Skid Shoe Adjustment: Adjust the skid shoes to the appropriate height for your surface. Raise them for gravel driveways to prevent damage and lower them for paved surfaces for optimal snow removal.
History & Background
The MTD Cub Cadet White 318-700 series snow blowers were introduced as a dependable option for homeowners needing a mid-sized snow removal solution. While there weren't major redesigns during their production run, minor improvements were likely implemented over the years. These models filled a significant need in the market for a reasonably priced and reliable two-stage snow blower.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 318-700?
The MTD Cub Cadet White 318-700 series typically used Tecumseh gasoline engines. The horsepower varied depending on the specific sub-model, ranging from 5 HP to 8 HP. Some models also offered an optional electric start.
What is the clearing width of the 318-700?
The clearing width for the MTD Cub Cadet White 318-700 series snow blowers typically ranged from 18 to 21 inches. The intake height was approximately 12 to 16 inches.
Is the 318-700 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 318-700 is a two-stage snow blower. This means it uses an auger to collect and break up the snow and an impeller to throw the snow away from the cleared area.
What are common parts needed for the 318-700?
Commonly needed parts for the MTD Cub Cadet White 318-700 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and replacement auger paddles.
