Mtd Cub Cadet White 317-860 Snow Blower Thrower Parts
The MTD Cub Cadet White 317-860 snow blower, likely manufactured in the late 1980s and early 1990s, was a popular gas-powered machine known for its robust two-stage design and dependable performance. With a clearing width suitable for residential driveways and walkways, this model offered a balance of power and maneuverability. Its two-stage system efficiently chewed through snow and ice, making it a reliable choice for homeowners.
The MTD Cub Cadet White 317-860 snow thrower was part of a line of snow removal equipment designed for residential use. While exact production years are difficult to pinpoint without serial number records, it's most probable that this model was available from the late 1980s to the mid-1990s. It typically features a Tecumseh gasoline engine ranging from 5-8 HP. Many models included an electric start option for easier starting in cold weather. The 317-860 is a two-stage snow blower, employing an auger to break up the snow and an impeller to throw it. It typically boasts a clearing width between 24 and 26 inches, with an intake height of around 20-21 inches. Throwing distance could reach up to 30 feet depending on snow conditions. Most variations used a wheel drive system, offering multiple forward and reverse speeds controlled via a gear shift. The chute control is typically a manual crank or lever, allowing the operator to direct the snow stream. While some configurations may have lacked a headlight or heated grips, the 317-860 was well-suited for clearing moderate to heavy snowfall from driveways, sidewalks, and patios.
Specifications
| Engine | Tecumseh 5-8 HP, Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1-1.5 gallons (approximate) |
| Weight | 200-250 lbs (approximate) |
| Years Produced | Late 1980s - Mid 1990s (estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for signs of wear, damage, or bending. Replace worn parts promptly to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger and gearbox.
- Fuel Stabilizer: Before storing the snow blower for the off-season, add fuel stabilizer to the gas tank to prevent fuel degradation and carburetor issues.
- Skid Shoe Adjustment: Adjust the skid shoes to the correct height based on your surface type (pavement, gravel, etc.) to prevent damage to both the snow blower and your driveway.
History & Background
The MTD Cub Cadet White 317-860 was introduced as a part of a broader offering of snow removal solutions by MTD. This model represented a blend of affordability and functionality, catering to homeowners needing reliable snow clearing capabilities. While it may not have featured groundbreaking innovations, its solid construction and dependable performance solidified its place as a popular choice during its production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 317-860?
The MTD Cub Cadet White 317-860 typically uses a Tecumseh gasoline engine. Horsepower usually ranges from 5 to 8 HP. Some models were equipped with an electric start option for added convenience.
What is the clearing width of the 317-860?
The clearing width of the MTD Cub Cadet White 317-860 is generally between 24 and 26 inches. The intake height is approximately 20-21 inches.
Is the 317-860 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 317-860 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw it out the chute. This two-stage design is more effective for handling deeper snow and ice compared to single-stage models.
What are common parts needed for the 317-860?
Common wear parts for the MTD Cub Cadet White 317-860 include shear pins (for the auger), drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
