Mtd Cub Cadet White 317-841 Snow Blower Thrower Parts
The MTD Cub Cadet White 317-841 snow blower, likely manufactured in the late 1980s and early 1990s, is a gas-powered, two-stage snow thrower known for its robust build. With a clearing width typically around 26 inches, this model was a popular choice for homeowners needing reliable snow removal performance in moderate to heavy snowfall conditions. Its two-stage design allowed it to handle deeper snow than single-stage models.
The MTD Cub Cadet White 317-841 snow blower was part of MTD's line of outdoor power equipment, produced under various brand names including Cub Cadet and White. The exact years of production are difficult to pin down precisely, but it was common in the late 80's and early 90's. Typically powered by a Tecumseh engine, these models usually featured around 8-10 horsepower. An electric start option was frequently available, adding to user convenience. This is a two-stage snow blower, meaning it uses an auger to break up the snow and then an impeller to throw it out of the chute. Expect a clearing width of around 26 inches and an intake height of approximately 20-21 inches. The throwing distance can vary, but expect up to 30-40 feet under ideal conditions. The drive system is wheel-driven, with multiple forward and reverse speeds allowing for good maneuverability. Chute controls were generally manual, requiring the operator to adjust the direction and deflection. Headlights were a common feature. The 317-841 is well suited for handling moderate to heavy snowfalls on driveways and sidewalks.
Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1980s - Early 1990s (estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The MTD Cub Cadet White 317-841 was a popular two-stage snow blower model manufactured by MTD. It represented a durable and reliable option for homeowners during its production run. While specific dates and redesign information are not widely available, this model held a significant place in the snow blower market as a robust and dependable machine for snow removal.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 317-841?
The Mtd Cub Cadet White 317-841 typically used a Tecumseh engine, ranging from 8 to 10 horsepower. Some models featured an electric start option.
What is the clearing width of the 317-841?
The clearing width of the Mtd Cub Cadet White 317-841 is approximately 26 inches, with an intake height of around 21 inches.
Is the 317-841 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 317-841 is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller to discharge it through the chute. This design allows it to handle deeper and heavier snow than a single-stage model.
What are common parts needed for the 317-841?
Common wear parts for the 317-841 include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Regularly inspecting and replacing these parts ensures optimal performance and longevity of your snow blower.
