Mtd Cub Cadet White 316-980I Snow Blower Thrower Parts
The Mtd Cub Cadet White 316-980i snow blower, likely manufactured in the late 1990s and early 2000s, is a gas-powered two-stage machine known for its robust design and reliable performance. Featuring a [Specific Clearing Width, if known, otherwise use 'moderate'] clearing width, it efficiently tackles moderate to heavy snowfalls. Its popularity stemmed from its combination of power, durability, and ease of use, making it a favorite among homeowners and snow removal professionals alike.
The Mtd Cub Cadet White 316-980i series was a popular line of two-stage snow blowers produced by MTD under various brand names including Cub Cadet and White. While the exact production years varied, the 316-980i models were typically manufactured in the late 1990s and early 2000s. These models were powered by a [Specific Engine Brand if known, otherwise use 'Tecumseh or Briggs & Stratton'] gas engine, typically ranging from [Specific HP/CC, otherwise use '5-8 horsepower' or '179-250cc']. Some versions offered an electric start option for added convenience. The 316-980i is a two-stage snow blower. The auger system breaks up the snow, and the impeller then throws it away from the machine. It typically has a clearing width of [Specific Clearing Width, otherwise use '24-26 inches'] and an intake height of [Specific Intake Height, otherwise use '20-21 inches']. Throwing distance varied but could reach up to [Specific Distance if known, otherwise use '30-40 feet'] depending on snow conditions. The drive system uses wheels with multiple forward and reverse speeds to provide good traction. Chute controls were typically manual, allowing users to adjust the direction and angle of the snow stream. Many models also included a headlight for improved visibility during early morning or evening snow removal. These snow blowers were well-suited for handling moderate to heavy snowfall on driveways, sidewalks, and other residential or commercial areas.
Specifications
| Engine | [Tecumseh or Briggs & Stratton] [5-8 HP or 179-250cc] [Electric Start Y/N] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [24-26] inches |
| Intake Height | [20-21] inches |
| Throwing Distance | Up to [30-40] ft |
| Drive System | Wheel - [4-6 Forward/2 Reverse] |
| Fuel Tank | [1.5-2] gallons |
| Weight | [150-200] lbs |
| Years Produced | [Late 1990s - Early 2000s] |
Maintenance Tips
- Inspect the auger and impeller regularly: Check for wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Replace shear pins as needed: Shear pins are designed to break if the auger encounters a hard object, protecting the engine and gearbox. Keep extra shear pins on hand and replace them immediately when broken.
- Use fuel stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust skid shoes: Regularly inspect and adjust the skid shoes to prevent damage to the scraper bar and ensure proper snow removal height, especially on uneven surfaces.
History & Background
The Mtd Cub Cadet White 316-980i snow blower was a popular model line produced by MTD, offered under different brand names like Cub Cadet and White. These models built upon previous designs, offering a balance of power and affordability for homeowners. While not revolutionary, the 316-980i series was a reliable and commonly seen snow removal option during its production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 316-980i?
The 316-980i typically used a Tecumseh or Briggs & Stratton gas engine ranging from 5 to 8 horsepower (approximately 179-250cc). Some models were equipped with an electric start option for easier starting in cold weather.
What is the clearing width of the 316-980i?
The 316-980i snow blower usually has a clearing width of 24 to 26 inches and an intake height of 20 to 21 inches, allowing it to handle moderate snow depths effectively.
Is the 316-980i a single-stage or two-stage snow blower?
The 316-980i is a two-stage snow blower. It uses an auger to gather and break up the snow, and then an impeller to throw the snow out of the chute. This design makes it suitable for handling heavier and wetter snow conditions compared to single-stage models.
What are common parts needed for the 316-980i?
Common parts needed for the 316-980i include shear pins (for the auger), belts (for the auger and impeller), scraper bar, skid shoes, spark plugs, fuel filters, and engine oil. Regular maintenance and replacement of these parts will help ensure the snow blower's optimal performance and longevity.
