Mtd Cub Cadet White 316-960A Snow Blower Thrower Parts
The Mtd Cub Cadet White 316-960a snow blower, manufactured in the late 1990s and early 2000s, was a popular choice for homeowners seeking a reliable gas-powered machine. This robust two-stage snow thrower, with its substantial clearing width, made quick work of residential snow removal. Its durable construction and ease of use contributed to its widespread appeal.
The Mtd Cub Cadet White 316-960a is a two-stage snow thrower designed for both residential and light commercial use. Production spanned the late 1990s into the early 2000s. Typically powered by a Tecumseh or Briggs & Stratton engine ranging from 8-10 HP, it offered an optional electric start for added convenience. The two-stage design features a robust auger system that breaks up snow and ice, feeding it into a high-speed impeller that discharges it through the chute. The 316-960a typically has a clearing width of 26-28 inches and an intake height of around 20-21 inches, allowing it to handle significant snowfalls. Throwing distances can reach up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, usually with 6 forward speeds and 2 reverse speeds, offering good maneuverability. Chute controls are typically manual, with a crank or lever to adjust the direction and deflection. Some models included a headlight for improved visibility during early morning or evening snow removal. This model is ideally suited for homeowners with medium to large driveways and properties experiencing moderate to heavy snowfall.
Specifications
| Engine | Tecumseh/Briggs & Stratton 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | Approximately 1.5 gallons |
| Weight | Approximately 200-250 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any damaged parts to maintain optimal snow-throwing performance.
- Replace Shear Pins: Keep extra shear pins on hand and replace them immediately if they break. Using the correct shear pins is crucial to protect the auger gearbox from damage.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues. Drain the fuel for long term storage.
History & Background
The Mtd Cub Cadet White 316-960a snow blower was introduced as a mid-range option for consumers needing more power and capacity than single-stage models. It filled a crucial spot in the market, offering a balance of performance and affordability. While there weren't any major redesigns during its production run, minor improvements and component variations likely occurred.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 316-960a?
The Mtd Cub Cadet White 316-960a is typically powered by a Tecumseh or Briggs & Stratton engine, ranging from 8 to 10 horsepower. Some models offer an optional electric start.
What is the clearing width of the 316-960a?
The clearing width of the Mtd Cub Cadet White 316-960a is typically between 26 and 28 inches, with an intake height of approximately 20-21 inches.
Is the 316-960a a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 316-960a is a two-stage snow blower. This means it uses an auger to collect snow and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 316-960a?
Common wear parts for the Mtd Cub Cadet White 316-960a include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters.
