Mtd Cub Cadet White 316-850A Snow Blower Thrower Parts
The Mtd Cub Cadet White 316-850a snow blower was a popular model known for its reliability in tackling moderate to heavy snowfall. Likely manufactured during the late 1980s and early 1990s, this gas-powered snow thrower typically features a clearing width around 26-30 inches. Its two-stage design made it a favorite for homeowners and property managers needing a robust machine to clear driveways and walkways efficiently.
The Mtd Cub Cadet White 316-850a series snow blowers were a staple in the MTD lineup, offering a balance of power and maneuverability. Production years likely spanned the late 1980s and early 1990s. These models were generally equipped with a Tecumseh or Briggs & Stratton gas engine, ranging from 8 to 10 horsepower, providing ample power for residential and light commercial use. Electric start was often an available option, enhancing user convenience in cold weather. The 316-850a is a two-stage snow thrower, meaning it utilizes an auger to break up the snow and an impeller to throw it. The auger system is typically a toothed or serrated design for efficient snow intake. Clearing widths generally ranged from 26 to 30 inches, with an intake height of around 20-22 inches. Throwing distances could reach up to 30-40 feet, depending on snow conditions. The drive system is wheel-driven, typically offering multiple forward speeds and reverse. Chute controls are usually manual, allowing the operator to adjust the direction and angle of the snow stream. Many models included a headlight for improved visibility during nighttime snow removal. While heated grips were not a standard feature on this series, the machine proved to be a reliable choice for handling moderate to heavy snowfalls on driveways, walkways, and smaller parking areas.
Specifications
| Engine | Tecumseh or Briggs & Stratton 8-10 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-30 inches |
| Intake Height | 20-22 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1980s - Early 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace damaged parts immediately to maintain optimal performance.
- Shear Pins: Always keep spare shear pins on hand. Replace broken shear pins promptly to prevent damage to the auger gearbox. Use only the correct shear pins specified for your model.
- Oil Changes & Fuel Stabilizer: Perform regular oil changes according to the manufacturer's recommendations. Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
History & Background
The Mtd Cub Cadet White 316-850a snow blower models were introduced as part of MTD's effort to provide reliable and affordable snow removal solutions. These models represented a solid mid-range option, offering two-stage performance without the high cost of more advanced machines. They filled an important segment in the market, providing accessible snow clearing for homeowners and small businesses.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 316-850a?
The Mtd Cub Cadet White 316-850a is typically powered by a Tecumseh or Briggs & Stratton engine ranging from 8 to 10 horsepower. Electric start was often an available option on these models.
What is the clearing width of the 316-850a?
The Mtd Cub Cadet White 316-850a snow blower usually has a clearing width between 26 and 30 inches, with an intake height of around 20-22 inches.
Is the 316-850a a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 316-850a is a two-stage snow blower. This means it uses an auger to collect and break up the snow, and then an impeller to forcefully discharge it through the chute.
What are common parts needed for the 316-850a?
Common parts needed for the Mtd Cub Cadet White 316-850a include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
