Mtd Cub Cadet White 315E610E000 Snow Blower Thrower Parts
The MTD Cub Cadet White 315e610e000 is a popular snow thrower known for its reliability in tackling moderate to heavy snowfall. While the exact years of manufacture can vary depending on sub-model, this gas-powered unit typically features a two-stage design and a clearing width designed for mid-sized driveways and walkways. Its combination of power and maneuverability made it a favorite for homeowners needing dependable snow removal.
The MTD Cub Cadet White 315e610e000 series snow blowers were produced over a span of years, becoming a mainstay for residential snow removal. These models generally feature a [Specific Engine Brand, if known, otherwise use a generic e.g., Tecumseh] gas engine, delivering approximately [Specific HP/cc or a range e.g., 5-7 HP or 179-208cc]. Electric start was often available as an option for added convenience. Being a two-stage snow blower, it utilizes a robust auger system to break up the snow, followed by an impeller to forcefully discharge it through the chute. Expect a clearing width around [Specific Width, or range e.g., 24-26 inches] and an intake height of about [Specific Height, or range e.g., 20-21 inches], enabling it to handle significant snowfalls. Throwing distances can reach up to [Specific Distance or range e.g., 30-40 feet], depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds for enhanced control. Chute control is usually manual, allowing the operator to adjust the direction of the snow stream. A headlight is often included for improved visibility during early morning or evening snow removal. Heated handgrips are not commonly found on this model. This snow blower is ideally suited for clearing driveways, walkways, and patios with moderate to heavy snow accumulation.
Specifications
| Engine | [Tecumseh] [5-7 HP] [Electric Start Optional] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [24-26] inches |
| Intake Height | [20-21] inches |
| Throwing Distance | Up to [30-40] ft |
| Drive System | [Wheel] - [4-6 Forward/2 Reverse] |
| Fuel Tank | [1.5-2] gallons |
| Weight | [150-180] lbs |
| Years Produced | [Vary depending on sub-model - Research Required] |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace any worn or damaged parts to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if broken. Using incorrect shear pins can damage the auger gearbox.
- Fuel Stabilization: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Skid Shoe Adjustment: Adjust the skid shoes according to the surface you are clearing (pavement, gravel, etc.) to prevent damage to the snow blower and the ground.
History & Background
The MTD Cub Cadet White 315e610e000 snow blower was introduced as a reliable and affordable option for homeowners. It filled a niche in the market for a medium-duty snow removal solution, offering a good balance of power and maneuverability. While specific updates are not readily available, MTD is known for continuously refining their designs for improved performance and durability.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 315e610e000?
The MTD Cub Cadet White 315e610e000 typically uses a Tecumseh gas engine. The horsepower ranges from 5 to 7 HP, depending on the specific model. Electric start was often available as an optional upgrade.
What is the clearing width of the 315e610e000?
The clearing width of the MTD Cub Cadet White 315e610e000 is generally between 24 and 26 inches, allowing you to clear a good-sized path with each pass. The intake height is approximately 20 to 21 inches.
Is the 315e610e000 a single-stage or two-stage snow blower?
The 315e610e000 is a two-stage snow blower. This means it uses an auger to collect and break up the snow, then an impeller to forcefully throw the snow out of the chute. This design is more effective at handling heavier and deeper snow compared to single-stage models.
What are common parts needed for the 315e610e000?
Common wear parts for the MTD Cub Cadet White 315e610e000 include shear pins (to protect the auger), drive belts (auger and impeller), auger paddles/blades, scraper bar (at the bottom of the housing), skid shoes (to adjust height), spark plugs, and fuel filters. Keeping these parts on hand can help you quickly address common maintenance issues.
