Mtd Cub Cadet White 315-850A Snow Blower Thrower Parts
The MTD Cub Cadet White 315-850A snow thrower was a popular gas-powered, two-stage model often manufactured throughout the late 1980s and 1990s. Known for its robust design and reliability, this snow blower typically featured a 26-inch clearing width and was available with electric start on some models. Homeowners and professionals alike appreciated its ability to handle moderate to heavy snowfall on driveways and sidewalks.
The MTD Cub Cadet White 315-850A represents a generation of reliable snow throwers designed for both residential and light commercial use. While exact production years may vary, models were common from the late 1980s through the late 1990s. These machines were generally powered by a Tecumseh Snow King engine, typically ranging from 8 to 10 horsepower (approximately 250cc to 300cc), with electric start being an optional feature on some configurations. As a two-stage snow blower, the 315-850A uses an auger to break up and gather snow, then an impeller to forcefully discharge it. The clearing width is usually 26 inches, with an intake height around 20-21 inches, allowing it to tackle moderate snow depths. Throwing distances could reach up to 30-40 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds. Chute rotation is usually manually controlled. While lacking features like headlights or heated grips, the 315-850A was valued for its straightforward design and ability to clear driveways, walkways, and smaller parking areas efficiently in moderate to heavy snow conditions.
Specifications
| Engine | Tecumseh Snow King 8-10 HP (250-300cc) Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Approximately 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1980s - Late 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace damaged components immediately to maintain optimal performance.
- Shear Pin Replacement: Keep a supply of replacement shear pins on hand. Replace broken shear pins as needed to protect the auger and transmission.
- Oil Changes and Fuel Stabilizer: Change the engine oil annually, following the manufacturer's recommendations. Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation.
History & Background
The MTD Cub Cadet White 315-850A snow blower was introduced as a mid-range model in the MTD lineup, offering a balance of power and maneuverability. It gained popularity for its durable construction and relatively affordable price point. While there weren't major redesigns during its production run, minor component updates might have occurred over the years.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 315-850a?
The Mtd Cub Cadet White 315-850a typically features a Tecumseh Snow King engine, usually in the 8 to 10 horsepower range (approximately 250cc to 300cc). Electric start was an optional feature on some models.
What is the clearing width of the 315-850a?
The Mtd Cub Cadet White 315-850a has a clearing width of 26 inches and an intake height of approximately 21 inches.
Is the 315-850a a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 315-850a is a two-stage snow blower. It uses an auger to gather and break up the snow, and an impeller to throw the snow through the chute.
What are common parts needed for the 315-850a?
Common parts needed for the 315-850a include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and engine oil.
