Mtd Cub Cadet White 315-850 Snow Blower Thrower Parts
The MTD Cub Cadet White 315-850 series snow blowers, manufactured throughout the late 20th and early 21st centuries, were popular gas-powered machines designed for residential snow removal. Typically featuring a two-stage design and a clearing width around 21-26 inches (depending on the specific sub-model), these snow throwers provided a reliable and affordable option for homeowners dealing with moderate to heavy snowfall.
The MTD Cub Cadet White 315-850 series snow blowers represent a range of models designed for residential use, produced by MTD under various brand names like Cub Cadet and White. Production spanned across several years, with variations in features and engine specifications. Engine options typically included Briggs & Stratton or Tecumseh engines, ranging from 5 to 8 horsepower. Some models featured an electric start option for added convenience. The 315-850 series primarily consisted of two-stage snow blowers. These machines utilize an auger to collect snow and feed it into an impeller, which then discharges the snow through the chute. Clearing widths varied, often falling between 21 and 26 inches, with intake heights suitable for handling moderate snow depths. Throwing distance depended on the engine power and impeller design, with some models capable of throwing snow up to 30-40 feet. The drive system typically used wheels with various forward and reverse speeds, providing maneuverability in different snow conditions. Chute controls were usually manual, allowing the operator to adjust the direction and angle of the snow discharge. While some models featured a headlight for improved visibility, heated grips were less common. The 315-850 series was well-suited for homeowners and property managers dealing with moderate to heavy snowfall on driveways, sidewalks, and walkways.
Specifications
| Engine | Tecumseh 5-8 HP Electric Start Available |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21-26 inches |
| Intake Height | 16-21 inches |
| Throwing Distance | Up to 30-40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 150-200 lbs |
| Years Produced | Late 20th Century - Early 21st Century |
Maintenance Tips
- Inspect the auger and impeller regularly for wear and damage. Replace worn auger paddles or a damaged impeller to maintain optimal performance.
- Replace shear pins immediately if they break. Use only the correct shear pins specified for your model to prevent damage to the auger gearbox.
- Check belt tension and condition. Loose or worn belts can reduce the snow blower's throwing power. Replace belts when they show signs of wear or slippage.
- Use fuel stabilizer in the off-season. This will prevent fuel from breaking down and gumming up the carburetor.
History & Background
The MTD Cub Cadet White 315-850 series snow blowers were introduced as part of MTD's line of affordable and reliable snow removal equipment. While specific redesigns were minor, variations existed within the series regarding engine size and features. These models were significant for providing homeowners with a practical and cost-effective solution for managing winter snow.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 315-850?
The MTD Cub Cadet White 315-850 typically features a Tecumseh engine, with horsepower ranging from 5 to 8 HP. Some models included an electric start option.
What is the clearing width of the 315-850?
The clearing width of the MTD Cub Cadet White 315-850 varies depending on the specific model, but it's generally between 21 and 26 inches. The intake height is usually between 16 and 21 inches.
Is the 315-850 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 315-850 is a two-stage snow blower. It uses an auger to collect snow and then an impeller to throw the snow through the discharge chute. This two-stage design allows it to handle deeper and heavier snow compared to single-stage models.
What are common parts needed for the 315-850?
Common parts needed for the MTD Cub Cadet White 315-850 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these wear parts will help maintain the snow blower's performance and longevity.
