Mtd Cub Cadet White 314-960 Snow Blower Thrower Parts
The Mtd Cub Cadet White 314-960 snow blower is a robust gas-powered machine manufactured throughout the late 1990s and early 2000s, popular for its reliability and ability to handle moderate to heavy snowfall. Typically featuring a 24-26 inch clearing width and a two-stage design, this snow thrower became a favorite among homeowners seeking a dependable solution for residential snow removal.
The Mtd Cub Cadet White 314-960 snow blower was a staple in residential snow removal during its production run. The exact years of production varied, but it was commonly found in catalogs and dealerships throughout the late 1990s and early 2000s. This model typically used a Tecumseh engine, offering between 5 and 7 horsepower, depending on the specific sub-model. An electric start option was available on some configurations, providing ease of use in cold conditions. The 314-960 utilizes a two-stage design, meaning it uses an auger to break up the snow and then an impeller to throw it out of the chute. The auger is usually a robust, serrated steel design, optimized for cutting through packed snow and ice. Clearing widths range from 24 to 26 inches, with an intake height of around 20-21 inches, allowing it to tackle moderate snow depths. The throwing distance could reach up to 30 feet, depending on snow consistency and engine performance. The drive system is wheel-driven, offering multiple forward and reverse speeds for maneuverability. Chute control is typically manual, allowing the operator to direct the snow stream. Many models featured a headlight for improved visibility during early morning or evening snow removal. While heated grips were not standard, they could be added with aftermarket kits. The 314-960 is well-suited for homeowners with medium-sized driveways and sidewalks who experience moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 5-7 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1-1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace worn parts promptly to maintain optimal performance.
- Shear Pins: Always keep spare shear pins on hand. These protect the auger gearbox from damage if it encounters a hard object like ice or rocks. Replace broken shear pins immediately.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season. This prevents fuel from degrading and causing starting issues.
- Oil Changes: Follow the manufacturer's recommended oil change schedule. Using the correct type and weight of oil is crucial for engine longevity.
History & Background
The Mtd Cub Cadet White 314-960 was a popular model during its time, offering a balance of power and affordability. While specific redesigns were not common, minor improvements to the engine and chute system may have been implemented over the years. Its significance lies in its reliability and widespread availability, making it a trusted choice for many homeowners dealing with winter snow.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 314-960?
The Mtd Cub Cadet White 314-960 typically features a Tecumseh engine, ranging from 5 to 7 horsepower. Some models were available with an electric start option for added convenience.
What is the clearing width of the 314-960?
The clearing width of the Mtd Cub Cadet White 314-960 is typically between 24 and 26 inches, with an intake height of around 20-21 inches.
Is the 314-960 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 314-960 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw it out of the chute, allowing it to handle heavier snowfalls more effectively.
What are common parts needed for the 314-960?
Common parts needed for the Mtd Cub Cadet White 314-960 include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
