Mtd Cub Cadet White 314-612E000 Snow Blower Thrower Parts
The Mtd Cub Cadet White 314-612e000 series snow throwers were popular gas-powered models known for their reliability. These snow blowers typically featured a two-stage design and a clearing width suitable for average-sized driveways. While exact production years vary, many models in this range were produced in the late 1990s and early 2000s, offering homeowners a dependable option for snow removal.
The Mtd Cub Cadet White 314-612e000 series represents a range of snow blowers aimed at homeowners seeking a balance between power and maneuverability. While specific production years can vary slightly depending on the exact sub-model, most were manufactured throughout the late 1990s and early 2000s. Typically powered by a Tecumseh or Briggs & Stratton gas engine, these models often featured engines ranging from 5 to 8 horsepower, providing ample power for typical snowfall. Some models offered an electric start option for added convenience in cold weather. The two-stage design efficiently handles snow. The auger system breaks up snow and feeds it into the impeller, which then throws the snow out of the chute. Clearing widths generally ranged from 24 to 26 inches with an intake height of around 20-21 inches, enabling it to handle moderate snow depths. Expect a throwing distance of up to 30 feet, depending on snow consistency and engine power. Featuring a wheel drive system with multiple forward and reverse speeds, these snow blowers offer good traction and control. Chute controls were typically manual, allowing the operator to adjust the direction of the snow stream. Some models also included a headlight for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature, they could have been available on higher-end variations. These snow blowers are well-suited for homeowners dealing with moderate snowfall on driveways, sidewalks, and patios. They are a good choice for areas that receive consistent snowfall throughout the winter season.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Gas Engine (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1-2 gallons (approximate) |
| Weight | 150-200 lbs (approximate) |
| Years Produced | Late 1990s - Early 2000s (Approximate) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace damaged parts promptly to maintain optimal performance.
- Replace Shear Pins: Inspect shear pins before each use. These pins protect the auger and transmission from damage if the auger encounters a solid object. Always have replacement shear pins on hand.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes according to the surface you're clearing. Raise them for gravel or uneven surfaces and lower them for paved surfaces to protect the scraper bar.
History & Background
The Mtd Cub Cadet White 314-612e000 series snow blowers were introduced as part of MTD's broader line of snow removal equipment. These models aimed to provide a balance of power and affordability for residential users. They represent a popular segment of MTD's snow blower offerings during their production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 314-612e000?
The Mtd Cub Cadet White 314-612e000 series typically uses a Tecumseh or Briggs & Stratton gas engine. Horsepower generally ranges from 5 to 8 HP. Some models may have included an electric start option for easier starting in cold conditions.
What is the clearing width of the 314-612e000?
The clearing width for the Mtd Cub Cadet White 314-612e000 series is generally between 24 and 26 inches. The intake height is approximately 20-21 inches.
Is the 314-612e000 a single-stage or two-stage snow blower?
The 314-612e000 series is a two-stage snow blower. This means it uses an auger to collect and break up the snow, then an impeller to throw the snow out of the chute. This two-stage design allows it to handle deeper and heavier snow compared to single-stage models.
What are common parts needed for the 314-612e000?
Common wear parts for the Mtd Cub Cadet White 314-612e000 include shear pins (essential for protecting the auger), drive belts and auger belts, scraper bar, skid shoes, spark plugs, fuel filters, and auger paddles.
