Mtd Cub Cadet White 313-830 Snow Blower Thrower Parts
The Mtd Cub Cadet White 313-830 snow blower, a robust and reliable machine, was a popular choice for homeowners and light-duty commercial use during its production run. Typically gas-powered and featuring a two-stage design, this snow thrower offers a practical clearing width for efficient snow removal. Its dependable performance made it a staple for tackling moderate to heavy snowfall.
The Mtd Cub Cadet White 313-830 snow thrower was a popular model designed for residential and light commercial snow removal. While exact production years can vary, it was likely manufactured in the late 1980s and early to mid 1990s. These machines were typically powered by a Tecumseh gasoline engine, ranging from 5 to 8 horsepower, depending on the specific sub-model. An electric start option was available on some models for easier starting in cold weather. The 313-830 features a two-stage design. The first stage consists of a robust auger system that breaks up and gathers snow, while the second stage uses a high-speed impeller to throw the snow away from the clearing path. Expect a clearing width between 24 and 26 inches, with an intake height of approximately 20-21 inches. Throwing distance typically ranges up to 30-35 feet, depending on the snow conditions. These snow blowers typically feature a wheel-drive system with multiple forward and reverse speeds allowing operators to adjust the speed based on the amount of snow they are clearing. Chute control is usually manual, allowing for directional adjustment of the snow stream. Many models included a headlight for enhanced visibility in low-light conditions. While heated grips were not standard on all models, they may have been available as an optional accessory. The 313-830 is ideally suited for homeowners with moderate to large driveways and sidewalks in regions with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | Approx. 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1980s - Mid 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn parts promptly to maintain optimal snow removal performance.
- Shear Pins: Always keep spare shear pins on hand. If the auger suddenly stops turning, a shear pin may have broken. Replace it with the correct type to prevent damage to the snow blower.
- Oil Changes and Fuel Stabilizer: Follow the manufacturer's recommendations for oil changes. Before storing the snow blower for the off-season, add fuel stabilizer to prevent fuel degradation and carburetor problems.
- Skid Shoe Adjustment: Adjust the skid shoes to the appropriate height for your surface (paved, gravel, etc.). This prevents damage to the scraper bar and ensures efficient snow removal.
History & Background
The Mtd Cub Cadet White 313-830 snow blower was a popular model within the MTD family of snow removal equipment. While specific introduction dates and updates are hard to pinpoint without specific serial numbers, it represented a solid, reliable machine during its production period. It helped solidify MTD's reputation for providing affordable and functional snow blowers for homeowners.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 313-830?
The Mtd Cub Cadet White 313-830 typically uses a Tecumseh engine, with horsepower ranging from 5 to 8 HP. Some models offered an electric start option.
What is the clearing width of the 313-830?
The clearing width of the Mtd Cub Cadet White 313-830 is typically between 24 and 26 inches, with an intake height of approximately 20-21 inches.
Is the 313-830 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 313-830 is a two-stage snow blower. It uses an auger to gather and break up snow, then an impeller to throw the snow away from the clearing path.
What are common parts needed for the 313-830?
Common wear parts for the Mtd Cub Cadet White 313-830 include shear pins, belts (auger and drive belts), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Keeping these parts in good condition is essential for optimal performance.
