Mtd Cub Cadet White 313-612E Snow Blower Thrower Parts
The MTD Cub Cadet White 313-612e snow thrower, a popular choice for homeowners and property managers, offered reliable snow removal performance for residential use. While exact production years may vary, it's known to have been available in the late 20th century. Typically a gas-powered two-stage model, the 313-612e featured a respectable clearing width for tackling moderate snowfall amounts.
The MTD Cub Cadet White 313-612e snow thrower provided users with a practical solution for clearing driveways and walkways. Although exact production dates and model specifications require further research using available historical documentation, the 313-612e was generally equipped with a gas-powered engine, likely from Briggs & Stratton or Tecumseh, with horsepower in the range of 5-8 HP. An electric start option was common. This model employed a two-stage system, using an auger to gather snow and an impeller to throw it through the discharge chute. Clearing widths typically ranged from 24 to 26 inches with an intake height around 20 inches, allowing it to handle moderate snow depths. Throwing distances could reach up to 30 feet, depending on snow conditions. The drive system was typically wheel-driven, offering multiple forward and reverse speeds. Chute control was generally manual, allowing the operator to adjust the direction of the snow stream. A headlight was often included for improved visibility during early morning or evening snow removal. While heated grips weren't a standard feature on this model, the robust build and dependable engine made it suitable for dealing with average residential snowfall. This snow blower was designed for paved surfaces and ideal for homeowners dealing with moderate snowfall amounts.
Specifications
| Engine | Tecumseh 5 HP Electric Start (Likely) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24 inches |
| Intake Height | 20 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - 5 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons (Estimated) |
| Weight | Approximately 180 lbs (Estimated) |
| Years Produced | Late 1990s - Early 2000s (Estimated) |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace worn or damaged parts to maintain optimal performance.
- Check and replace shear pins as needed. These protect the auger and gearbox from damage if the auger hits a hard object.
- Perform regular oil changes to keep the engine running smoothly. Follow the manufacturer's recommendations for oil type and change intervals.
- Use fuel stabilizer in the fuel tank during off-season storage to prevent fuel degradation and carburetor problems.
History & Background
The MTD Cub Cadet White 313-612e snow thrower was part of a line of snow removal equipment designed for residential use. While specific details about its introduction are limited, it represented a common type of two-stage snow blower available during its production run. Its significance lies in providing a reliable and affordable option for homeowners dealing with moderate snowfalls.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 313-612e?
The MTD Cub Cadet White 313-612e was likely powered by a Tecumseh engine around 5 horsepower. An electric start option was commonly available.
What is the clearing width of the 313-612e?
The clearing width of the 313-612e is approximately 24 inches, with an intake height of around 20 inches.
Is the 313-612e a single-stage or two-stage snow blower?
The 313-612e is a two-stage snow blower. It uses an auger to collect the snow and then an impeller to throw the snow out of the discharge chute.
What are common parts needed for the 313-612e?
Common replacement parts include shear pins, belts, auger paddles, the scraper bar, skid shoes, spark plugs, and fuel filters. These parts often wear due to regular use and exposure to the elements.
