Mtd Cub Cadet White 313-610E Snow Blower Thrower Parts
The MTD, Cub Cadet, and White 313-610e snow blowers, manufactured in the early 2000s, were popular gas-powered, two-stage machines known for their reliability in handling moderate to heavy snowfall. Typically featuring a 24-26 inch clearing width, these snow throwers offered a balance of power and maneuverability, making them a favorite among homeowners for clearing driveways and walkways. Their robust construction ensured dependable performance season after season.
The MTD, Cub Cadet, and White 313-610e series of snow blowers were designed to provide efficient snow removal for residential properties. These models were primarily produced in the early 2000s and shared a common design platform. The engine typically found in these models was a Tecumseh engine ranging from 5 to 6.5 HP (approximately 179cc - 205cc), providing ample power for most snow removal tasks. Electric start was often an available option, adding convenience in colder weather. The 313-610e is a two-stage snow blower, featuring an auger to collect and break up snow, followed by an impeller to forcefully discharge it through the chute. The auger system is designed to efficiently pull snow into the machine, even in deep or compacted conditions. The clearing width typically ranges from 24 to 26 inches, with an intake height of around 20-21 inches, allowing it to handle significant snow accumulation. Throwing distance is typically rated up to 30-35 feet. These models featured a wheel-drive system with multiple forward and reverse speeds, providing good traction and control. Chute controls were typically manual, allowing the operator to adjust the direction and angle of the snow stream. Many models included a headlight for improved visibility during early morning or evening snow removal. While heated grips weren't a standard feature on these models, their reliability and performance in moderate to heavy snow made them a popular choice for homeowners.
Specifications
| Engine | Tecumseh 5-6.5 HP Electric Start Available |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5 Gallons |
| Weight | Approximately 170-190 Lbs |
| Years Produced | Early 2000s |
Maintenance Tips
- Auger and Impeller Inspection: Regularly inspect the auger blades and impeller for wear or damage. Replace worn parts to maintain optimal performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if broken to prevent damage to the auger gearbox.
- Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Oil Changes: Change the engine oil annually, or more frequently if used heavily, to ensure smooth operation and extend engine life. Consult your owner's manual for the correct oil type.
History & Background
The MTD, Cub Cadet, and White 313-610e snow blowers were introduced in the early 2000s as a reliable and affordable option for homeowners needing a two-stage snow removal solution. While there weren't significant redesigns during their production run, they represented a standard in snow blower design at the time, offering a balance of power and ease of use.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 313-610e?
The 313-610e snow blowers typically used a Tecumseh engine, ranging from 5 to 6.5 HP. Electric start was often an available option.
What is the clearing width of the 313-610e?
The clearing width of the MTD Cub Cadet White 313-610e models ranged from 24 to 26 inches, with an intake height of approximately 20-21 inches.
Is the 313-610e a single-stage or two-stage snow blower?
The 313-610e is a two-stage snow blower. It uses an auger to collect and break up snow, and then an impeller to forcefully throw the snow through the discharge chute.
What are common parts needed for the 313-610e?
Common wear parts for the 313-610e include shear pins, belts (auger and drive), auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Keeping these parts in good condition will help ensure the snow blower operates reliably.
