Mtd Cub Cadet White 313-600 Snow Blower Thrower Parts
The MTD Cub Cadet White 313-600 series snow thrower, likely manufactured in the late 1980s and early 1990s, was a popular gas-powered model known for its reliability and performance in residential snow removal. Featuring a two-stage design with a [SPECIFIC Clearing width if known, e.g., 24-inch] clearing width, this snow blower offered a practical solution for homeowners dealing with moderate to heavy snowfall.
The MTD Cub Cadet White 313-600 snow thrower was a well-regarded machine during its production run in the late 80s and early 90s, designed for both homeowners and lighter-duty commercial applications. It typically featured a Tecumseh engine, likely in the 5-8 HP range, though the exact horsepower and cubic centimeter displacement varied depending on the specific model year. Electric start was an optional feature on some versions. As a two-stage snow blower, the 313-600 utilized a robust auger to break up the snow and feed it into a high-speed impeller, which then discharged the snow through the chute. The clearing width was typically around 24-26 inches, with an intake height of approximately 20-21 inches, allowing it to handle significant snowfalls. The throwing distance could reach up to 30 feet, depending on the snow conditions. These models usually employed a wheel drive system, offering multiple forward speeds and reverse. Chute controls were typically manual, with a crank or lever used to adjust the direction and deflection of the snow stream. While not usually equipped with heated grips, some models included a headlight for improved visibility during nighttime operation. The MTD Cub Cadet White 313-600 was ideally suited for homeowners and property managers dealing with moderate to heavy snow accumulation on driveways, sidewalks, and patios.
Specifications
| Engine | Tecumseh 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 Gallons (Estimate) |
| Weight | ~200 Lbs (Estimate) |
| Years Produced | Late 1980s - Early 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Check and Replace Shear Pins: Shear pins protect the auger from damage if it encounters a hard object. Always keep spare shear pins on hand and replace them immediately if they break.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This prevents fuel degradation and ensures easier starting when winter returns.
History & Background
The MTD Cub Cadet White 313-600 series snow thrower was a popular model in the late 1980s and early 1990s, representing a solid, reliable option in the two-stage snow blower market. While specific updates and redesigns within the series are difficult to pinpoint without detailed model year information, these machines established a reputation for dependability amongst homeowners looking for a cost-effective solution for snow removal.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 313-600?
The MTD Cub Cadet White 313-600 typically used a Tecumseh engine, with horsepower ranging from approximately 5 to 8 HP. Electric start was an available option on some models.
What is the clearing width of the 313-600?
The clearing width of the MTD Cub Cadet White 313-600 is typically between 24 and 26 inches, with an intake height around 20-21 inches.
Is the 313-600 a single-stage or two-stage snow blower?
The MTD Cub Cadet White 313-600 is a two-stage snow blower. This means it uses an auger to break up the snow and then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 313-600?
Common parts needed for the MTD Cub Cadet White 313-600 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters.
