Mtd Cub Cadet White 312-850 Snow Blower Thrower Parts
The MTD Cub Cadet White 312-850 snow blower, manufactured in the late 1980s and early 1990s, was a popular two-stage, gas-powered model known for its robust performance and reliability. Featuring a [Clearing Width] inch clearing width, it was a workhorse for homeowners dealing with moderate to heavy snowfall. Its dependable engine and durable construction made it a favorite for tackling challenging winter conditions.
The MTD Cub Cadet White 312-850 snow blower enjoyed a production run spanning from approximately 1985 to 1995. It was designed as a durable, mid-sized snow removal solution for residential use. It was typically equipped with a Briggs & Stratton or Tecumseh engine, ranging from 10 to 12 horsepower, offering ample power for most snow clearing tasks. An electric start option was commonly available. As a two-stage snow blower, the 312-850 utilizes an auger to break up and gather the snow, then an impeller to forcefully discharge it through the chute. This system allowed for efficient removal of both light and heavy snow. The machine boasted a [Clearing Width] inch clearing width and a [Intake Height] inch intake height, enabling it to handle substantial snowfalls. Throwing distance could reach up to 30-40 feet, depending on snow conditions. The 312-850 featured a wheel drive system with multiple forward and reverse speeds, providing good traction and maneuverability. Chute controls were typically manual, allowing the operator to adjust the direction and distance of the snow stream. A headlight was often included for improved visibility during early morning or evening snow removal. This model was best suited for homeowners facing moderate to heavy snowfalls on medium to large-sized driveways and walkways.
Specifications
| Engine | Tecumseh 12 HP Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 32 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 250 lbs |
| Years Produced | 1985-1995 (approximate) |
Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace shear pins immediately if they break to prevent damage to the auger gearbox.
- Check the belt tension regularly and adjust as needed. Replace belts showing signs of wear or cracking.
- Change the engine oil at the recommended intervals. Use fuel stabilizer during off-season storage to prevent fuel degradation.
- Adjust the skid shoes to ensure proper clearing height and prevent damage to the pavement.
History & Background
The MTD Cub Cadet White 312-850 was introduced as a reliable and powerful two-stage snow blower during the mid-1980s. While there were minor variations over its production run, the core design remained consistent, emphasizing durability and performance. It became a popular choice for homeowners seeking a dependable snow removal solution.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 312-850?
The Mtd Cub Cadet White 312-850 typically used a Tecumseh 12 HP engine. Electric start was a common option.
What is the clearing width of the 312-850?
The clearing width of the Mtd Cub Cadet White 312-850 is 32 inches, and the intake height is approximately 21 inches.
Is the 312-850 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 312-850 is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw it through the chute.
What are common parts needed for the 312-850?
Common parts needed for the 312-850 include shear pins, belts (auger and drive), auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters.
