Mtd Cub Cadet White 312-800 Snow Blower Thrower Parts
The Mtd Cub Cadet White 312-800 series snow blowers, manufactured throughout the late 1980s and 1990s, were reliable gas-powered machines popular for their robust construction and effective snow removal capabilities. Typically featuring a two-stage design and a clearing width around 26-30 inches (depending on the specific sub-model), these snow throwers were favored by homeowners and property managers seeking a durable and powerful solution for moderate to heavy snowfall.
The Mtd Cub Cadet White 312-800 series encompasses a range of snow blowers produced by MTD under the Cub Cadet and White Outdoor brands. Production spanned from the late 1980s into the 1990s, with various sub-models available. These models were generally powered by Briggs & Stratton or Tecumseh engines, ranging from 8 to 12 horsepower. Electric start options were often available, providing convenient starting in cold weather. The 312-800 series were typically two-stage snow blowers, employing an auger to break up snow and an impeller to throw it away from the machine. Clearing widths varied, but were generally in the 26 to 30-inch range, with intake heights between 20-23 inches. Throwing distances could reach up to 30-40 feet, depending on snow conditions and engine power. These machines featured a wheel drive system with multiple forward and reverse speeds, allowing for good maneuverability. Chute controls were typically manual, requiring the operator to adjust the direction and deflection of the snow stream. Some models featured headlights for improved visibility. These snow blowers were well-suited for homeowners and property managers dealing with moderate to heavy snowfalls on driveways, sidewalks, and other paved surfaces.
Specifications
| Engine | Tecumseh 8-12 HP (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-30 inches |
| Intake Height | 20-23 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 4-6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200-250 lbs |
| Years Produced | Late 1980s - 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger and impeller for signs of wear, damage, or bending. Replace any damaged parts to ensure optimal snow throwing performance.
- Replace Shear Pins: Always use the correct shear pins for your model. Inspect and replace them as needed to protect the auger and transmission from damage if the auger encounters a hard object.
- Check Belt Tension: Ensure proper belt tension for both the auger and drive system. Loose belts can slip, reducing performance and potentially causing damage. Adjust or replace belts as needed.
- Use Fuel Stabilizer: Add fuel stabilizer to the fuel tank before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easy starting next season.
History & Background
The Mtd Cub Cadet White 312-800 series was introduced as a mid-range offering in the Cub Cadet and White Outdoor snow blower lineups. It provided a balance of power and maneuverability for residential and light commercial use. While not undergoing major redesigns during its production run, minor improvements were incorporated over the years to enhance performance and reliability.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 312-800?
The Mtd Cub Cadet White 312-800 series typically used a Tecumseh engine, ranging from 8 to 12 horsepower. Some models were available with an optional electric start.
What is the clearing width of the 312-800?
The clearing width of the 312-800 series snow blowers generally ranges from 26 to 30 inches, with an intake height between 20 and 23 inches, depending on the specific sub-model.
Is the 312-800 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 312-800 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to forcefully throw the snow away from the machine.
What are common parts needed for the 312-800?
Common wear parts for the 312-800 include shear pins, auger belts, drive belts, auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
