Mtd Cub Cadet White 312-750 Snow Blower Thrower Parts
The Mtd Cub Cadet White 312-750 snow blower, likely manufactured in the late 1980s and early 1990s, was a popular gas-powered, two-stage model favored for its reliability and ability to handle moderate to heavy snowfall. Featuring a robust engine and a clearing width suitable for residential driveways and walkways, the 312-750 offered a practical and durable solution for snow removal.
The Mtd Cub Cadet White 312-750 series of snow blowers was produced by MTD (Modern Tool and Die Company) under various brand names. Production years are likely in the late 1980s and early 1990s. Typically, these models were equipped with a Tecumseh gas engine, often in the 10-12 HP range. While some models may have featured an optional electric start, most were pull-start. As a two-stage snow blower, the 312-750 utilized an auger system to break up the snow and an impeller to throw it through the discharge chute. Expect a clearing width around 30-32 inches and an intake height of approximately 20-22 inches. Throwing distances could reach up to 30-40 feet, depending on snow conditions. These snow blowers usually have a wheel-driven system with multiple forward and reverse speeds, offering good maneuverability. Chute controls were typically manual, allowing users to adjust the direction and angle of the snow discharge. A headlight was standard for increased visibility during early morning or evening snow removal. While heated grips were not a common feature, the 312-750 was well-suited for handling moderate to heavy snowfall on driveways, walkways, and smaller commercial properties.
Specifications
| Engine | Tecumseh 10-12 HP Gas Engine (Electric Start Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 30-32 inches |
| Intake Height | 20-22 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 250 lbs |
| Years Produced | Late 1980s - Early 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for any signs of wear, damage, or bending. Replace worn or damaged parts to maintain optimal snow throwing performance.
- Check and Replace Shear Pins: Ensure shear pins are in good condition. Replace them immediately if they are broken or sheared off to protect the auger and transmission from damage due to ice chunks or hidden objects.
- Use Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues. Drain the carburetor bowl if storing for an extended period.
- Adjust Skid Shoes: Adjust the skid shoes to prevent the scraper bar from scraping directly on the ground. This prevents damage to the scraper bar and helps the snow blower glide smoothly over uneven surfaces.
History & Background
The Mtd Cub Cadet White 312-750 was introduced as a mid-range snow blower offering a balance of power and maneuverability for residential and light commercial use. It represented a standard in two-stage snow removal technology of its time. There were no major redesigns during its production run, focusing on consistent performance and reliability.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 312-750?
The Mtd Cub Cadet White 312-750 typically uses a Tecumseh gas engine, ranging from 10 to 12 HP. Some models may have had an optional electric start feature.
What is the clearing width of the 312-750?
The Mtd Cub Cadet White 312-750 has a clearing width of approximately 30-32 inches and an intake height of 20-22 inches.
Is the 312-750 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 312-750 is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 312-750?
Commonly needed parts for the 312-750 include shear pins, belts (auger and drive belts), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
