Mtd Cub Cadet White 312-650 Snow Blower Thrower Parts
The MTD, Cub Cadet, and White 312-650 series snow blowers were popular machines manufactured throughout the late 20th and early 21st centuries. These gas-powered snow throwers, primarily two-stage models, typically featured a clearing width between 21 and 26 inches, making them well-suited for residential snow removal. Known for their reliability and ease of use, the 312-650 models helped homeowners tackle moderate to heavy snowfall.
The MTD, Cub Cadet, and White 312-650 series represents a range of snow blowers produced under these brands, sharing similar designs and components. Production spanned several years, evolving with minor updates and variations. Most models were equipped with a Briggs & Stratton or Tecumseh engine, ranging from 5 to 8 horsepower. An electric start option was often available for added convenience. These snow blowers utilize a two-stage system, featuring an auger to break up the snow and an impeller to throw it. Clearing widths typically ranged from 21 to 26 inches, with intake heights around 16-21 inches, allowing them to handle deeper snowfalls. Depending on the specific model and engine power, throwing distances could reach up to 30-40 feet. The drive system is wheel-based, offering multiple forward and reverse speeds for maneuverability. Chute controls are usually manual, allowing the operator to adjust the direction and angle of the snow discharge. Some models included a headlight for improved visibility in low-light conditions. Ideal for homeowners and small businesses, these snow blowers are effective in handling moderate to heavy snowfall on driveways, sidewalks, and parking areas. The robust build quality makes them a dependable choice for years of service.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 21-26 inches |
| Intake Height | 16-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1-1.5 gallons |
| Weight | 150-200 lbs |
| Years Produced | Late 20th - Early 21st Century |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear, replacing worn parts as needed to maintain optimal performance.
- Always use the correct shear pins and replace them immediately if they break, preventing damage to the auger gearbox.
- Check the belt tension regularly and adjust as needed to ensure proper power transfer from the engine to the auger and impeller.
- Change the engine oil annually and use fuel stabilizer during off-season storage to prevent fuel system issues.
History & Background
The MTD, Cub Cadet, and White 312-650 snow blower series emerged as a staple in residential snow removal equipment. These models, while not revolutionary, provided a reliable and affordable solution for homeowners facing winter's challenges. Their widespread availability and ease of maintenance contributed to their popularity and longevity in the market.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 312-650?
The 312-650 series typically used a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 horsepower. Some models offered an electric start option for easier starting in cold weather.
What is the clearing width of the 312-650?
The clearing width of the MTD, Cub Cadet, and White 312-650 snow blowers generally ranges from 21 to 26 inches, with an intake height of approximately 16 to 21 inches.
Is the 312-650 a single-stage or two-stage snow blower?
The MTD, Cub Cadet, and White 312-650 is a two-stage snow blower. It uses an auger to collect and break up the snow, and then an impeller to throw the snow out of the chute.
What are common parts needed for the 312-650?
Common parts needed for the 312-650 include shear pins, belts (auger and drive), auger paddles (on some models), scraper bar, skid shoes, spark plugs, and fuel filters. Regular replacement of these parts ensures optimal performance and longevity of your snow blower.
