Mtd Cub Cadet White 312-181-000 Snow Blower Thrower Parts
312-181-000 parts and accessories
The Mtd Cub Cadet White 312-181-000 is a robust gas-powered snow thrower known for its reliability and efficiency. While exact production years vary, it's representative of models produced in the late 1990s and early 2000s. Typically featuring a two-stage design and a clearing width around 26-28 inches, this snow blower was popular for its ability to handle moderate to heavy snowfall in residential settings.
The Mtd Cub Cadet White 312-181-000 series snow blowers were a staple in many households, offering a blend of power and user-friendliness during the late 1990s and early 2000s. These models were typically equipped with a Tecumseh engine, ranging from 8 to 10 horsepower, offering sufficient power for most residential snow removal tasks. Many units included an electric start option for easier starting in cold weather. Being a two-stage snow blower, it utilizes an auger to break up the snow and then an impeller to throw it further away. Clearing widths commonly ranged from 26 to 28 inches, with an intake height of around 20-21 inches. This allowed it to handle moderate to heavy snowfalls effectively, throwing snow distances up to 30-35 feet. The drive system was typically wheel-driven, with multiple forward and reverse speeds, allowing for good maneuverability. Chute controls were generally manual, requiring the user to adjust the direction of the snow discharge. A headlight provided added visibility during nighttime snow removal. While heated grips were not a standard feature, the 312-181-000 models were well-suited for homeowners needing a reliable snow blower for driveways and walkways in areas with moderate to heavy snowfall.
Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 35 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s (estimated) |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for signs of wear, damage, or bending. Replace worn parts to maintain optimal performance.
- Replace Shear Pins: Always use the correct shear pins for your model. Keep spares on hand and replace them immediately if they break to protect the auger gearbox.
- Use Fuel Stabilizer: Add fuel stabilizer to the gas tank before storing the snow blower for the off-season to prevent fuel degradation and carburetor issues.
- Adjust Skid Shoes: Adjust the skid shoes based on the surface you are clearing. Raise them for gravel or uneven surfaces and lower them for paved driveways.
History & Background
The Mtd Cub Cadet White 312-181-000 series of snow blowers provided reliable snow removal capabilities for homeowners for many years. While specific details on its introduction are limited, it represents a period of popular two-stage snow blowers focused on practical features and affordability. It was a common sight in residential areas experiencing moderate to heavy snowfall.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 312-181-000?
The Mtd Cub Cadet White 312-181-000 typically uses a Tecumseh engine, ranging from 8 to 10 horsepower. An electric start option was available on some models.
What is the clearing width of the 312-181-000?
The clearing width of the Mtd Cub Cadet White 312-181-000 is typically between 26 and 28 inches, with an intake height of around 20-21 inches.
Is the 312-181-000 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 312-181-000 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow further away from the cleared area.
What are common parts needed for the 312-181-000?
Common parts needed for the Mtd Cub Cadet White 312-181-000 include shear pins, drive belts, auger belts, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance of these parts will ensure optimal performance.
