Mtd Cub Cadet White 312-180-088 Snow Blower Thrower Parts
312-180-088 parts and accessories
The Mtd Cub Cadet White 312-180-088 snow blower was a popular choice for homeowners and light commercial use during its production run. Typically powered by a gas engine, this two-stage model offered a practical clearing width for driveways and walkways. Its robust design and ease of use made it a reliable solution for moderate to heavy snowfall conditions.
The Mtd Cub Cadet White 312-180-088 snow thrower was designed to tackle residential and smaller commercial snow removal tasks. These models were typically manufactured throughout the 1990s and early 2000s. The engine was commonly a Tecumseh or Briggs & Stratton, ranging from 8-12 HP, offering sufficient power to handle most snow conditions. Some models featured an electric start option for easier starting in cold weather. As a two-stage snow blower, it employs an auger to break up the snow and then an impeller to throw it away from the clearing path. Clearing widths varied, but a common size was around 26-28 inches with an intake height of 20-21 inches. The machine could throw snow up to 30-40 feet. Drive systems typically used wheels with multiple forward and reverse speeds, allowing for controlled operation. Chute controls were often manual, allowing the operator to adjust the direction and angle of the snow discharge. Some models included a headlight for improved visibility during early morning or evening snow removal. While heated grips weren't standard on all models, some offered them as an upgrade. The 312-180-088 was best suited for paved surfaces and ideal for homeowners and property managers dealing with moderate to heavy snowfalls.
Specifications
| Engine | Tecumseh / Briggs & Stratton 8-12 HP Electric Start Optional |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward / 2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | 200-250 lbs |
| Years Produced | 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage and wear. Replace worn or damaged parts immediately to maintain optimal performance.
- Always use the correct shear pins for your model. Keep spares on hand and replace them whenever they break to protect the auger and gearbox.
- Check belt tension regularly. Loose belts can slip and reduce the machine's throwing power. Adjust or replace belts as needed.
- Change the engine oil according to the manufacturer's recommendations. Use a fuel stabilizer in the gasoline during off-season storage to prevent fuel degradation. Adjust skid shoes to prevent damage to the auger housing or driveway surface.
History & Background
The Mtd Cub Cadet White 312-180-088 snow blower was a popular model in its time, offering a balance of power and affordability. While there weren't significant redesigns during its production, minor improvements and feature variations were implemented over the years. It contributed to the brand's reputation for producing reliable and durable snow removal equipment.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 312-180-088?
The 312-180-088 typically featured a Tecumseh or Briggs & Stratton engine, ranging from 8 to 12 horsepower. Electric start was an available option on some models.
What is the clearing width of the 312-180-088?
The clearing width of the Mtd Cub Cadet White 312-180-088 is commonly 26-28 inches, with an intake height of around 20-21 inches.
Is the 312-180-088 a single-stage or two-stage snow blower?
The 312-180-088 is a two-stage snow blower. It uses an auger to gather and break up the snow, then an impeller to throw the snow out of the chute.
What are common parts needed for the 312-180-088?
Common parts needed for the 312-180-088 include shear pins, belts (auger and drive), auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
