Mtd Cub Cadet White 31193-8 Snow Blower Thrower Parts
Shop Mtd Cub Cadet White 31193-8 Snow Blower Thrower parts. From filters and fluids to blades and belts, we carry the replacements you need to keep running.
The Mtd Cub Cadet White 31193-8 is a popular snow blower, commonly manufactured in the late 1990s and early 2000s. This gas-powered model features a two-stage design and offered a clearing width suitable for a range of residential snow removal needs. Known for its reliability and ease of use, the 31193-8 became a favorite for homeowners seeking a dependable snow-clearing solution.
About the 31193-8
The Mtd Cub Cadet White 31193-8 snow blower was a workhorse for many homeowners, primarily produced in the late 1990s and early 2000s. It was designed as a two-stage snow thrower, offering a significant upgrade in performance over single-stage models. While specific engine models varied depending on the year of manufacture, it generally featured a Tecumseh or Briggs & Stratton gas engine, ranging from 5 to 8 horsepower. Many models came equipped with an electric start option for easier starting in cold weather. The two-stage design utilizes an auger system to break up the snow and then an impeller to throw the snow further away from the cleared area. The clearing width of the 31193-8 typically ranged from 24 to 26 inches, with an intake height of around 20-21 inches. This allowed it to handle moderate to heavy snowfall effectively. Throwing distances could reach up to 30 feet depending on the snow conditions. The drive system was wheel-based, with multiple forward and reverse speeds, allowing for controlled movement in various snow depths. Chute controls were typically manual, requiring the operator to physically adjust the direction and distance of the thrown snow. While some models may have had a headlight, heated grips were not a standard feature. The 31193-8 was ideally suited for clearing driveways, walkways, and smaller parking areas in regions with moderate to heavy snowfall.
31193-8 Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | Unknown gallons |
| Weight | Unknown lbs |
| Years Produced | Late 1990s - Early 2000s |
31193-8 Maintenance Tips
- Regularly inspect the auger and impeller for damage, wear, or obstructions. Replace shear pins immediately if they break.
- Check the belt tension and condition regularly. Replace worn or frayed belts to ensure optimal performance.
- Change the engine oil according to the manufacturer's recommendations. Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues.
- Adjust the skid shoes to the appropriate height based on your surface type. This prevents damage to both the snow blower and your driveway.
31193-8 History & Background
The Mtd Cub Cadet White 31193-8 was introduced to provide a reliable and affordable two-stage snow removal option for homeowners. While there weren't significant redesigns during its production run, minor improvements may have been implemented over the years. It solidified Cub Cadet's position as a trusted brand in the residential snow blower market.
Frequently Asked Questions
Which drive axle bearing fits the MTD Cub Cadet White 31193-8?
The B1RS46 - Bearing, Ball is a common replacement for the drive axle on the MTD Cub Cadet White 31193-8 snow blower.
What auger shaft bearing is compatible with the MTD Cub Cadet White 31193-8?
The B1AC61 - Bearing, Ball is designed to fit the auger shaft of the MTD Cub Cadet White 31193-8 snow blower.
Which impeller shaft bearing fits the MTD Cub Cadet White 31193-8?
For the impeller shaft, the B1SB7210 - Ball Bearing is a suitable replacement for the MTD Cub Cadet White 31193-8 model.
What are common replacement bearings for the MTD Cub Cadet White 31193-8 snow blower?
Common replacement bearings for the MTD Cub Cadet White 31193-8 include the B1RS46 - Bearing, Ball for the drive axle, the B1AC61 - Bearing, Ball for the auger shaft, and the B1SB7210 - Ball Bearing for the impeller shaft.











