Mtd Cub Cadet White 31181C Snow Blower Thrower Parts
Find parts for your Mtd Cub Cadet White 31181C Snow Blower Thrower. We stock OEM and quality aftermarket replacements ready to ship.
The Mtd Cub Cadet White 31181C snow blower, likely manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage snow thrower known for its reliable performance in residential snow removal. Featuring a robust engine and a clearing width around 26-28 inches, it provided homeowners with a dependable solution for moderate to heavy snowfall. Its two-stage design efficiently handles snow, making it a popular choice for driveways and walkways.
About the 31181C
The Mtd Cub Cadet White 31181C snow blower was a popular model for residential snow removal, produced primarily in the late 1990s and early 2000s. It typically featured a Tecumseh engine, with horsepower ranging from 8 to 10 HP. An electric start option was often available for easier starting in cold weather conditions. As a two-stage snow blower, it utilizes an auger to break up and gather snow, followed by an impeller that throws the snow through the discharge chute. The clearing width is usually around 26-28 inches, with an intake height of approximately 20-21 inches, allowing it to handle deeper snowfalls. Throwing distance could reach up to 30-40 feet, depending on snow conditions. The drive system is typically wheel-driven, offering multiple forward and reverse speeds. Chute control is generally manual, allowing the operator to adjust the direction of the snow discharge. Many models included a headlight for improved visibility during nighttime snow removal. Heated grips were not a standard feature. The 31181C is best suited for use on paved surfaces, handling moderate to heavy snowfall on driveways, sidewalks, and patios. Regular maintenance is key to its longevity.
31181C Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approximately 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
31181C Maintenance Tips
- Inspect the auger and impeller regularly for wear and damage. Replace any worn or damaged parts promptly.
- Always use the correct shear pins for your model. Keep spares on hand and replace any broken shear pins immediately to prevent damage to the auger.
- Check the belt tension regularly. Loose belts can cause reduced performance and premature wear. Adjust or replace belts as needed.
- Change the engine oil according to the manufacturer's recommendations. Use fuel stabilizer in the gasoline during off-season storage to prevent fuel degradation and carburetor problems. Adjust skid shoes to suit surface conditions.
31181C History & Background
The Mtd Cub Cadet White 31181C was introduced as a reliable mid-range snow blower for homeowners. While specific dates of introduction and discontinuation are difficult to pinpoint, it was a common model during its production run. It represented a dependable option in the competitive residential snow removal market, offering a balance of power and maneuverability.
Frequently Asked Questions
Which auger shaft bearing fits the Mtd Cub Cadet White 31181C?
For the auger shaft on your Mtd Cub Cadet White 31181C, the B1RS46 - Bearing, Ball is a suitable replacement.
What bearing is recommended for the impeller shaft of the 31181C?
The B1AC61 - Bearing, Ball is an ideal choice for the impeller shaft bearing on your 31181C snow blower.
Which wheel axle bearing is suitable for the Mtd Cub Cadet White 31181C?
The B1SB7210 - Ball Bearing is a robust option for the wheel axle bearing on the Mtd Cub Cadet White 31181C.
What are common wear parts for the Mtd Cub Cadet White 31181C?
Common wear parts for the Mtd Cub Cadet White 31181C include various bearings. Consider replacing the auger shaft bearing with B1RS46 - Bearing, Ball, the impeller shaft bearing with B1AC61 - Bearing, Ball, and the wheel axle bearing with B1SB7210 - Ball Bearing.











