Skip to main content
(828) 649-7190
Same Day Shipping Before 2pm EST

Mtd Cub Cadet White 31180C Snow Blower Thrower Parts

Replacement parts for the Mtd Cub Cadet White 31180C Snow Blower Thrower. Browse our selection of OEM and aftermarket parts — filters, belts, hydraulics, electrical, and more.

The Mtd Cub Cadet White 31180C snow blower, likely manufactured in the late 1990s and early 2000s, is a popular gas-powered two-stage snow thrower known for its reliability and powerful snow clearing capabilities. Featuring a respectable clearing width, this model efficiently tackles moderate to heavy snowfall, making it a sought-after choice for homeowners and property managers alike.

About the 31180C

The Mtd Cub Cadet White 31180C represents a common and widely distributed snow blower designed for residential snow removal. Production years most likely ranged from the late 1990s through the early 2000s, though exact dates require further research. Typically, these units were powered by a Tecumseh engine, around 8-10 HP, with some models offering an electric start option for added convenience. As a two-stage snow blower, the 31180C utilizes an auger to break up the snow and then an impeller to throw it away from the cleared path. The clearing width usually falls in the 26-28 inch range, with an intake height of approximately 20-21 inches. Throwing distance can vary based on snow conditions, but expect up to 30-35 feet. The drive system is typically wheel-driven with multiple forward and reverse speeds, offering good maneuverability. Chute controls are generally manual, requiring the operator to physically adjust the direction and angle of the snow discharge. Many models featured a headlight for improved visibility during early morning or evening snow removal. While heated grips were not a standard feature on most models, the 31180C is ideal for handling moderate to heavy snowfall on driveways and walkways.

31180C Specifications

EngineTecumseh 8-10 HP Electric Start (Optional)
Stage TypeTwo-Stage
Clearing Width26-28 inches
Intake Height20-21 inches
Throwing DistanceUp to 35 ft
Drive SystemWheel - 5-6 Forward / 2 Reverse
Fuel Tank1.5 gallons
Weight200 lbs
Years ProducedLate 1990s - Early 2000s

31180C Maintenance Tips

  • Inspect the auger and impeller regularly for wear and damage. Replace worn paddles or blades to maintain optimal performance.
  • Always use the correct shear pins for your model. Using incorrect pins can damage the auger gearbox. Keep extra shear pins on hand.
  • Change the engine oil annually or after every 50 hours of use. This ensures proper lubrication and prolongs engine life. Use a fuel stabilizer during off-season storage to prevent fuel degradation.
  • Check and adjust the skid shoes as needed to prevent the scraper bar from scraping the ground. Adjusting the height ensures proper snow clearing and protects the scraper bar.

31180C History & Background

The Mtd Cub Cadet White 31180C was a popular model during its production run, offering a balance of power and affordability for homeowners. It solidified the Cub Cadet and White brands' position in the residential snow removal market by providing a reliable two-stage snow blower at a competitive price point.

Frequently Asked Questions

What replacement ball bearing is suitable for the MTD Cub Cadet White 31180C?

The B1RS46 - Bearing, Ball from A&I Products is a suitable replacement for common bearing applications in the 31180C, often cross-referencing to original part numbers like GW-741-0254.

Which ball bearing can replace an original GW-M6020004 in the 31180C?

For applications requiring a replacement for GW-M6020004 or A203603, the B1AC61 - Bearing, Ball offers a reliable solution for your MTD Cub Cadet White 31180C snow blower.

Is there a specific ball bearing recommended for shaft support in the MTD 31180C?

The B1SB7210 - Ball Bearing is designed to meet the demands of various shaft support applications in the MTD Cub Cadet White 31180C, often aligning with original equipment specifications such as GX21510.

What are some essential replacement bearings for the MTD Cub Cadet White 31180C?

For maintaining smooth operation of your 31180C, consider these essential replacement bearings: the B1RS46 - Bearing, Ball, the B1AC61 - Bearing, Ball, and the B1SB7210 - Ball Bearing. Regularly inspecting and replacing worn bearings ensures optimal performance.

Showing 1-3 of 3 products