Mtd Cub Cadet White 311-800A Snow Blower Thrower Parts
The MTD Cub Cadet White 311-800A snow thrower, manufactured in the late 1980s and early 1990s, was a popular gas-powered two-stage machine known for its reliability in tackling moderate to heavy snowfall. With a standard clearing width of 26 inches, this snow blower efficiently clears driveways and walkways, making it a favorite among homeowners seeking dependable snow removal performance.
The MTD Cub Cadet White 311-800A snow blower, a prominent model produced from the late 1980s into the early 1990s, catered to both residential and light commercial snow removal needs. These machines were typically equipped with a Tecumseh engine, ranging from 8 to 10 horsepower, often featuring an electric start option for easier cold-weather starts. As a two-stage snow blower, the 311-800A utilizes a robust auger system to break up snow and ice, feeding it into a high-speed impeller that throws the snow a considerable distance. The standard clearing width was around 26 inches, with an intake height of approximately 20-21 inches, enabling it to handle substantial snowfalls. Depending on conditions, throwing distances could reach up to 30-40 feet. The drive system typically consisted of a wheel drive with multiple forward and reverse speeds, allowing for controlled maneuverability. Chute controls were generally manual, offering directional adjustment of the snow stream. While not always standard, some models may have included a headlight for improved visibility during early morning or evening snow removal. The 311-800A was ideally suited for homeowners and property managers dealing with moderate to heavy snow accumulations on medium to large driveways and walkways. Given its age, maintaining these machines often requires attention to belts, shear pins, and engine components.
Specifications
| Engine | Tecumseh 8-10 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26 inches |
| Intake Height | 21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5 Forward/2 Reverse |
| Fuel Tank | 3 gallons |
| Weight | 250 lbs |
| Years Produced | Late 1980s - Early 1990s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pins are Critical: Always use the correct shear pins. Broken shear pins indicate an obstruction; address the cause before replacing them. Carry spares!
- Belt Tension: Check belt tension regularly. Loose belts can slip, reducing throwing power and drive performance. Adjust or replace belts as needed.
- Fuel Care: Use fuel stabilizer in the off-season to prevent fuel degradation and carburetor issues. Drain the fuel tank and carburetor if storing for an extended period.
History & Background
The MTD Cub Cadet White 311-800A was introduced as a robust, mid-sized snow blower aimed at homeowners and light commercial users. It gained popularity during its production run due to its reliable Tecumseh engine and efficient two-stage design, which allowed it to tackle significant snowfall effectively.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 311-800a?
The MTD Cub Cadet White 311-800A typically features a Tecumseh engine, ranging from 8 to 10 horsepower. An electric start option was often available for easier starting in cold weather.
What is the clearing width of the 311-800a?
The clearing width of the MTD Cub Cadet White 311-800A is typically 26 inches, with an intake height of approximately 21 inches.
Is the 311-800a a single-stage or two-stage snow blower?
The MTD Cub Cadet White 311-800A is a two-stage snow blower. It utilizes an auger to collect and break up the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 311-800a?
Common replacement parts for the MTD Cub Cadet White 311-800A include shear pins (auger and impeller), drive belts, auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters. Given the age of these machines, tires are also a common replacement item.
