Mtd Cub Cadet White 311-750 Snow Blower Thrower Parts
Browse Mtd Cub Cadet White 311-750 Snow Blower Thrower replacement parts. Everything from routine maintenance items to hard-to-find components.
The Mtd Cub Cadet White 311-750 snow blower was a popular choice for homeowners during its production run, offering reliable snow removal capabilities. This gas-powered, two-stage snow thrower typically featured a clearing width around 24-26 inches. Known for its sturdy build and efficient snow throwing, the 311-750 provided a balance of power and maneuverability.
About the 311-750
The Mtd Cub Cadet White 311-750 series represents a range of snow blowers designed for both residential and light commercial use. These machines were typically manufactured in the late 1980s and 1990s. Engine specifications varied within the 311-750 series but generally featured Tecumseh or Briggs & Stratton engines ranging from 5 to 8 horsepower. Some models offered an electric start option for easier starting in cold weather. As a two-stage snow blower, the 311-750 utilizes an auger to break up snow and then an impeller to throw it away from the clearing path. The clearing width usually ranged from 24 to 26 inches, with an intake height around 20-21 inches, allowing it to handle moderate to heavy snowfall. Throwing distances could reach up to 30-40 feet depending on snow conditions and engine power. Most 311-750 models used a wheel-drive system with multiple forward and reverse speeds for better control on icy surfaces. Chute controls were generally manual, allowing the operator to adjust the direction of snow discharge. While not always standard, some models included a headlight for improved visibility during early morning or evening snow removal. This snow blower is ideal for clearing driveways, walkways, and smaller parking areas, handling various snow conditions effectively.
311-750 Specifications
| Engine | Tecumseh/Briggs & Stratton 5-8 HP Optional Electric Start |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 gallons (approximate) |
| Weight | 200 lbs (approximate) |
| Years Produced | Late 1980s - 1990s |
311-750 Maintenance Tips
- Regularly inspect the auger and impeller for any signs of damage or wear. Replace worn paddles or damaged auger blades promptly.
- Always use the correct shear pins and replace them immediately if they break to prevent damage to the auger gearbox.
- Check and adjust belt tension periodically to ensure optimal performance and prevent belt slippage.
- Change the engine oil according to the manufacturer's recommendations, typically every season, to prolong engine life. Use fuel stabilizer during off-season storage to prevent fuel degradation and carburetor issues.
- Adjust the skid shoes to match the surface being cleared. Raise them for gravel driveways and lower them for paved surfaces.
311-750 History & Background
The Mtd Cub Cadet White 311-750 snow blower series filled a need for durable and reliable snow removal equipment for homeowners. Introduced in the late 1980s, the 311-750 offered a balance of power and affordability. While specific redesigns are not widely documented, the series maintained a consistent design focusing on user-friendliness and dependable performance during its production run.
Frequently Asked Questions
Which drive belt fits the Mtd Cub Cadet White 311-750?
The 7540131 - Belt, Drive is specifically designed to fit the drive system of your Mtd Cub Cadet White 311-750 snow blower.
When should the drive belt on the 311-750 be replaced?
The drive belt, such as the 7540131 - Belt, Drive, should be inspected annually for wear. Replace it if you observe cracks, fraying, stretching, or if the snow blower's drive performance is reduced.
How can I tell if the drive belt on my 311-750 is failing?
Signs of a failing drive belt, like the 7540131 - Belt, Drive, include the snow blower moving slowly or not at all, unusual noises, or a burning rubber smell. These indicate the belt may be slipping or worn out.
What are common parts needed for the 311-750?
Common wear items for the Mtd Cub Cadet White 311-750 include shear pins, auger paddles, and drive belts. For the drive belt, the 7540131 - Belt, Drive is a suitable replacement to maintain optimal performance.









