Mtd Cub Cadet White 310183 Snow Blower Thrower Parts
310183 parts and accessories
The MTD Cub Cadet White 310183 snow thrower, a popular choice for homeowners and light-duty commercial use, was manufactured in the late 1990s and early 2000s. This gas-powered, two-stage snow blower offers a generous clearing width, making quick work of driveways and walkways. Its dependable performance and ease of use contributed to its widespread adoption in snow-prone regions.
The MTD Cub Cadet White 310183 snow thrower was a staple in the MTD lineup, produced primarily from the late 1990s to the early 2000s. Powering this machine is typically a Tecumseh engine, available in various horsepower options, commonly ranging from 5 to 8 HP, depending on the specific sub-model. Electric start was often an available option, adding convenience in colder climates. As a two-stage snow blower, it utilizes an auger to break up the snow and an impeller to throw it through the chute. The auger system is designed to efficiently chew through snowdrifts. The clearing width generally ranges from 24 to 26 inches, with an intake height around 20-21 inches, allowing it to handle moderate snowfalls. The throwing distance can reach up to 30 feet, depending on snow conditions. Most 310183 models feature a wheel drive system with multiple forward and reverse speeds, providing good maneuverability. The chute is typically controlled manually with a crank, offering directional control of the snow stream. Headlights were often included for improved visibility during early morning or evening snow removal. While heated grips weren't a standard feature on this model, the 310183 is well-suited for handling moderate to heavy snowfall on residential driveways, walkways, and smaller commercial properties.
Specifications
| Engine | Tecumseh 5-8 HP with Electric Start Option |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 30 ft |
| Drive System | Wheel - Multiple Forward/Reverse Speeds |
| Fuel Tank | Approx. 1.5 Gallons |
| Weight | Approx. 180-220 Lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or obstructions. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pin Replacement: Always have spare shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox. Use only the correct shear pins specified for the 310183 model.
- Fuel System Maintenance: Use fuel stabilizer in the gasoline, especially during off-season storage, to prevent fuel degradation and carburetor issues. Drain the fuel tank before storing the snow blower for extended periods.
- Check and Adjust Skid Shoes: Ensure the skid shoes are properly adjusted to prevent damage to the pavement and to maintain the correct clearing height. Replace worn skid shoes as needed.
History & Background
The MTD Cub Cadet White 310183 snow thrower was introduced as a reliable and affordable option for homeowners needing a capable two-stage snow blower. While not a revolutionary design, it offered a solid combination of features and performance at a competitive price point, making it a popular choice during its production run. Its success contributed to MTD's reputation for producing dependable snow removal equipment.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310183?
The Mtd Cub Cadet White 310183 typically features a Tecumseh engine, with horsepower ranging from 5 to 8 HP. Electric start was available on some models.
What is the clearing width of the 310183?
The Mtd Cub Cadet White 310183 has a clearing width of 24-26 inches and an intake height of approximately 20-21 inches.
Is the 310183 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310183 is a two-stage snow blower. It uses an auger to collect and break up the snow, then an impeller to throw the snow through the discharge chute.
What are common parts needed for the 310183?
Common wear parts for the Mtd Cub Cadet White 310183 include shear pins, belts (auger and drive), auger paddles/blades, scraper bar, skid shoes, spark plugs, and fuel filters.
