Mtd Cub Cadet White 310-976A Snow Blower Thrower Parts
The Mtd Cub Cadet White 310-976a snow blower, commonly manufactured in the 1990s and early 2000s, is a gas-powered, two-stage snow thrower known for its reliability and robust construction. With a typical clearing width of around 24-26 inches, this model quickly became a popular choice for homeowners and property managers tackling moderate to heavy snowfall on driveways and walkways.
The Mtd Cub Cadet White 310-976a snow blower gained popularity as a dependable solution for residential snow removal. Production ran primarily throughout the 1990s and early 2000s. While engine models varied slightly depending on the exact year of manufacture, most units were equipped with a Tecumseh or Briggs & Stratton engine, typically ranging from 5 to 8 horsepower. Some models offered an optional electric start for easier starting in cold weather. This is a two-stage snow blower, meaning it utilizes both an auger and an impeller to efficiently clear snow. The auger breaks up the snow and feeds it into the impeller, which then throws the snow a considerable distance. The 310-976a usually boasts a clearing width of 24 to 26 inches, with an intake height of around 20 to 21 inches, allowing it to handle moderate snow depths. Throwing distance can reach up to 30-40 feet depending on snow conditions. These snow blowers utilize a wheel-drive system, offering multiple forward and reverse speeds for optimal control. Chute control is generally manual, allowing the operator to adjust the direction and angle of the snow stream. While a headlight wasn't always standard, many models included one for improved visibility in low-light conditions. Heated grips were not a common feature on this model. The 310-976a is best suited for homeowners and property managers dealing with moderate to heavy snowfall on paved surfaces such as driveways, sidewalks, and walkways.
Specifications
| Engine | Tecumseh or Briggs & Stratton 5-8 HP Electric Start (Optional) |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 24-26 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - Multiple Forward/Reverse |
| Fuel Tank | 1.5 Gallons (Approximate) |
| Weight | 200-250 Lbs (Approximate) |
| Years Produced | 1990s - Early 2000s |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for wear, damage, or bending. Replace worn or damaged parts promptly to maintain optimal performance.
- Shear Pins: Keep a supply of shear pins on hand. Replace broken shear pins immediately to prevent damage to the auger gearbox. Use only the correct shear pins specified by MTD.
- Oil Changes: Follow the manufacturer's recommended oil change schedule. Use the correct type and weight of oil specified in the owner's manual. Check the oil level before each use.
- Fuel Stabilizer: Add fuel stabilizer to the gasoline before storing the snow blower for the off-season. This will prevent fuel degradation and ensure easier starting next season.
History & Background
The Mtd Cub Cadet White 310-976a was introduced as a mid-range two-stage snow blower offering a balance of power and affordability. It filled a gap in the market for homeowners who needed more capability than a single-stage machine but didn't require the largest, most expensive models. While minor cosmetic and component updates may have occurred over its production run, the fundamental design remained largely consistent.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-976a?
The Mtd Cub Cadet White 310-976a is typically powered by a Tecumseh or Briggs & Stratton engine, ranging from 5 to 8 horsepower. Some models feature an optional electric start for added convenience.
What is the clearing width of the 310-976a?
The Mtd Cub Cadet White 310-976a features a clearing width of approximately 24-26 inches and an intake height of about 20-21 inches, making it suitable for moderate snow depths.
Is the 310-976a a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-976a is a two-stage snow blower. This means it uses an auger to break up the snow and then an impeller to throw the snow a considerable distance away.
What are common parts needed for the 310-976a?
Common replacement parts for the 310-976a include shear pins, drive belts, auger belts, auger paddles (if applicable), scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and timely replacement of these parts will help ensure the snow blower's reliable operation.
