Mtd Cub Cadet White 310-960 Snow Blower Thrower Parts
The MTD Cub Cadet White 310-960 series snow blowers, likely manufactured in the late 1990s and early 2000s, were popular gas-powered two-stage snow throwers known for their reliability. Typically featuring a clearing width of around 26-28 inches, these machines provided a good balance of power and maneuverability for both homeowners and light commercial users in areas with moderate to heavy snowfall.
The MTD Cub Cadet White 310-960 series represents a range of snow blowers produced under the MTD (Modern Tool and Die Company) umbrella, encompassing Cub Cadet and White Outdoor brands. Production years likely spanned the late 1990s into the early 2000s. These models were typically equipped with a Tecumseh Snow King engine, ranging from 8-10 HP, providing ample power for typical snow removal tasks. An electric start option was often available for added convenience. As a two-stage snow blower, the 310-960 utilizes an auger system to break up snow and an impeller to throw it away from the clearing path. Clearing widths typically ranged from 26 to 28 inches, with an intake height of around 20-21 inches, allowing it to handle moderate snowfalls. Throwing distances could reach up to 30-40 feet, depending on snow conditions. These models generally featured a wheel drive system with multiple forward and reverse speeds for enhanced control. Chute controls were typically manual, allowing users to adjust the direction and deflection of the snow stream. A headlight was usually included for improved visibility during early morning or evening snow removal. Heated grips were not a common feature on these models. The 310-960 series was ideal for homeowners and property managers dealing with moderate to heavy snowfalls on driveways, sidewalks, and other residential or commercial areas.
Specifications
| Engine | Tecumseh Snow King 8-10 HP Electric Start Available |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | 26-28 inches |
| Intake Height | 20-21 inches |
| Throwing Distance | Up to 40 ft |
| Drive System | Wheel - 5-6 Forward/2 Reverse |
| Fuel Tank | 1.5 gallons |
| Weight | Approx. 200 lbs |
| Years Produced | Late 1990s - Early 2000s |
Maintenance Tips
- Regularly inspect the auger and impeller for damage or wear. Replace shear pins immediately if broken.
- Check and adjust belt tension to ensure optimal performance of the auger and impeller.
- Change the engine oil annually or after every 25 hours of use. Use a fuel stabilizer in the gasoline when storing the snow blower for the off-season.
- Adjust the skid shoes to maintain proper ground clearance and prevent damage to the scraper bar and auger housing.
History & Background
The MTD Cub Cadet White 310-960 series was introduced as a mid-range snow blower, offering a balance of power and features for homeowners and light commercial users. These models represented a popular option in the snow blower market due to their robust construction and reliable performance. While there were no major redesigns during their production run, incremental improvements may have been implemented year-to-year.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-960?
The Mtd Cub Cadet White 310-960 typically features a Tecumseh Snow King engine, with horsepower ranging from 8 to 10 HP. An electric start option was often available for added convenience.
What is the clearing width of the 310-960?
The clearing width of the Mtd Cub Cadet White 310-960 snow blower is generally between 26 and 28 inches, with an intake height of approximately 20-21 inches.
Is the 310-960 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-960 is a two-stage snow blower. It uses an auger to break up the snow and then an impeller to throw the snow away from the clearing path. This two-stage design makes it more effective for handling heavier and deeper snow.
What are common parts needed for the 310-960?
Common replacement parts for the Mtd Cub Cadet White 310-960 include shear pins, drive belts, auger belts, auger paddles (if equipped), scraper bar, skid shoes, spark plugs, and fuel filters.
