Mtd Cub Cadet White 310-860 Snow Blower Thrower Parts
The Mtd Cub Cadet White 310-860 snow blower, manufactured in the late 1990s and early 2000s, is a gas-powered, two-stage machine popular for its reliable performance in residential snow removal. Featuring a [APPROXIMATE: 26-inch] clearing width, it offered a balance of power and maneuverability, making it a favorite for homeowners dealing with moderate snowfall. Its robust design allowed for efficient snow throwing and clearing of driveways and walkways.
The Mtd Cub Cadet White 310-860 snow blower was a popular model produced by MTD under the Cub Cadet and White Outdoor brands, primarily in the late 1990s and early 2000s. It was designed as a reliable and durable machine for residential snow removal. The 310-860 typically featured a Tecumseh engine, ranging from [APPROXIMATE: 8-10 HP], providing ample power for its two-stage operation. Many models included an optional electric start for convenient starting in cold weather. This snow blower utilizes a two-stage system, with a robust auger to break up and gather snow, followed by an impeller to forcefully discharge it through the chute. The clearing width is approximately [APPROXIMATE: 26 inches], with an intake height of around [APPROXIMATE: 21 inches], allowing it to handle moderate snow depths. The throwing distance could reach up to [APPROXIMATE: 30-40 feet], depending on snow conditions. It had a wheel-driven system with multiple forward and reverse speeds, providing good traction and control. Chute rotation was typically manual, and some models included a headlight for improved visibility. While heated grips were not common on this model, its overall performance made it ideal for homeowners facing moderate snowfall on driveways and walkways. It's suitable for areas receiving regular snowfall where a reliable and powerful snow removal solution is needed.
Specifications
| Engine | Tecumseh [APPROXIMATE: 8-10 HP] [Electric Start Optional] |
|---|---|
| Stage Type | Two-Stage |
| Clearing Width | [APPROXIMATE: 26] inches |
| Intake Height | [APPROXIMATE: 21] inches |
| Throwing Distance | Up to [APPROXIMATE: 40] ft |
| Drive System | Wheel - [APPROXIMATE: 4-6] Forward / [APPROXIMATE: 2] Reverse |
| Fuel Tank | [APPROXIMATE: 1.5] gallons |
| Weight | [APPROXIMATE: 200] lbs |
| Years Produced | [APPROXIMATE: Late 1990s - Early 2000s] |
Maintenance Tips
- Inspect Auger and Impeller: Regularly check the auger blades and impeller for damage or wear. Replace any worn or damaged parts to maintain optimal snow-throwing performance.
- Shear Pin Replacement: Keep spare shear pins on hand and replace them immediately if the auger stops abruptly, indicating a shear pin failure. Using the correct shear pin is crucial to protect the gearbox.
- Fuel and Oil Maintenance: Use fuel stabilizer during off-season storage to prevent fuel degradation. Change the engine oil annually, following the manufacturer's recommendations for viscosity and type.
- Skid Shoe Adjustment: Adjust the skid shoes to maintain the correct clearance between the scraper bar and the ground, preventing damage to the scraper bar and ensuring efficient snow removal, especially on uneven surfaces.
History & Background
The Mtd Cub Cadet White 310-860 snow blower was introduced as a mid-range option within the Cub Cadet and White Outdoor lineups, offering a balance of power and affordability. It filled a crucial segment in the market, catering to homeowners needing more than a single-stage but not requiring the largest, most expensive models. Its reputation for dependability contributed to its popularity during its production run.
Frequently Asked Questions
What engine is in the Mtd Cub Cadet White 310-860?
The Mtd Cub Cadet White 310-860 typically used a Tecumseh engine, ranging approximately from 8 to 10 horsepower. Electric start was an available option on some models.
What is the clearing width of the 310-860?
The clearing width of the Mtd Cub Cadet White 310-860 is approximately 26 inches, and the intake height is about 21 inches.
Is the 310-860 a single-stage or two-stage snow blower?
The Mtd Cub Cadet White 310-860 is a two-stage snow blower. This means it uses an auger to collect and break up the snow and an impeller to forcefully discharge the snow through the chute.
What are common parts needed for the 310-860?
Common replacement parts for the Mtd Cub Cadet White 310-860 include shear pins, drive belts, auger belts, auger paddles, scraper bar, skid shoes, spark plugs, and fuel filters. Regular maintenance and replacement of these parts will ensure optimal performance.
